FC-102P18KT4E20H1XGXXXXXXXXAXBXCXXX Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The Danfoss FC-102P18KT4E20H1XGXXXXXXXXAXBXCXXX is part of the VLT FC 102 HVAC Drives series and features a power rating of 18.5 kW or 25 HP. It is designed for three phase power with a mains voltage range of 380 to 480 VAC and uses normal cabinet mounting on A, B, or C frames. This drive comes with a graphical local control panel, an IP20 chassis protection level, and an RFI Class A1/B filter.
Internal Product Review
The FC-102P18KT4E20H1XGXXXXXXXXAXBXCXXX is a Danfoss VLT FC 102 HVAC drive with an 18.5 kW power rating and 380 - 480 VAC input. Three-phase power architecture and a graphical local control panel support straightforward commissioning and stable HVAC control. IP20/chassis protection with normal cabinet mounting makes this unit a well-executed choice for enclosed drive applications.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-102P18KT4E20H1XGXXXXXXXXAXBXCXXX is an AC variable-frequency drive from the VLT FC 102 HVAC Drives series produced by Danfoss. It modulates the speed of centrifugal fans and pumps in heating, ventilation, and air-conditioning systems. Building automation controllers can use the drive to match airflow or water flow to real-time demand, reducing unnecessary motor operation while maintaining the required conditions throughout a facility. Its variable-speed control is suitable for applications that experience changing loads during normal operation.
This model delivers a continuous mechanical output of 18.5 kW, which corresponds to 25 HP. The power section accepts a mains supply of 380–480 VAC from a three-phase power network, allowing direct connection to standard industrial feeders without a transformer. Its IP20 chassis enclosure protects against accidental contact but is not fully dust-tight, so the drive requires installation inside a suitable cabinet. Standard cabinet mounting is supported on A, B, or C frames, providing installation flexibility for different drive sizes. The unit does not include a brake chopper, so an external method must handle regenerative energy when the connected application produces it. No special mechanical adaptation is included under Adaptation B, leaving the drive configured for general HVAC operation.
An integrated EMC network meets RFI Class A1/B (C1), helping reduce conducted electrical noise when the cabinet uses proper grounding and cable routing. Operators interact with the drive through the Graphical Local Control Panel, which displays parameter menus, operating values, and trend information without requiring separate tools. Field wiring passes through standard cable entries under Adaptation A, so custom gland plates are not required for normal installation. The drive uses uncoated circuit boards and should therefore operate in clean, non-condensing air that does not expose the electronics to excessive moisture or corrosive contaminants. A mains disconnect is not integrated into the unit, so supply isolation must be provided by upstream equipment. Additional application-specific functions can be managed through the connected building management system and external protective devices.
