FC-102P18KT4E20H1XGXXXXSXXXXAXBXCXXXXDX Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
3 Minutes
7 Seconds
The Danfoss FC-102P18KT4E20H1XGXXXXSXXXXAXBXCXXXXDX is part of the VLT FC 102 HVAC Drives series and has a power rating of 18.5 kW or 25 HP. This drive offers three phase power input at 380 to 480 VAC for normal cabinet mounting on A, B, or C frames. It features IP20 chassis protection and includes a graphical local control panel and an RFI Class A1/B filter.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-102P18KT4E20H1XGXXXXSXXXXAXBXCXXXXDX is an AC variable-frequency drive produced by Danfoss for the VLT FC 102 HVAC Drives series. It regulates fan and pump motors in building automation systems by adjusting the frequency supplied to an induction motor. The drive supports precise airflow and water flow control in centralized mechanical rooms, where motor speed can be matched to changing ventilation, heating, and cooling demands. Its variable-speed operation can also reduce unnecessary motor loading when the connected equipment does not need to operate at full capacity.
This model delivers a continuous output of 18.5 kW, equivalent to 25 HP, allowing direct connection to common HVAC motor frames. The input section accepts 380–480 VAC from a three-phase power supply, so separate step-up or single-phase conversion equipment is unnecessary. An IP20 chassis protects the electronics against incidental finger contact while relying on airflow within the surrounding enclosure for cooling. Electrical noise suppression is provided by an RFI Class A1/B (C1) filter, which reduces conducted emissions that could interfere with sensitive building control networks. The drive does not include a brake chopper, so it is intended for variable-torque HVAC loads that do not require rapid dissipation of regenerated DC-bus energy. Its printed circuit boards are not coated, making the unit suitable for clean, controlled cabinet environments without high levels of moisture or corrosive contaminants.
User interaction occurs through a graphical local control panel that presents setpoints, alarms, operating values, and energy-use information on a backlit display. Mechanical installation uses normal cabinet mounting for A, B, and C frames, while standard cable entries under Adaptation A provide access for incoming power, motor, and control wiring. The chassis has no A, B, C0, C1, or D option modules installed, and the mains option bay is vacant. A standard language pack provides multilingual menu access for operating and maintenance tasks. The default module arrangement leaves the available option positions open for configurations that may require additional communication, control, or input and output functions.
Frequently Asked Questions about FC-102P18KT4E20H1XGXXXXSXXXXAXBXCXXXXDX:
Q: What input voltage range does the Danfoss FC-102P18KT4E20H1XGXXXXSXXXXAXBXCXXXXDX support?
A: The drive supports a mains voltage range of 380 - 480 VAC, making it suitable for industrial three-phase power supplies.
Q: What is the power rating of the FC-102P18KT4E20H1XGXXXXSXXXXAXBXCXXXXDX?
A: This drive is rated at 18.5 kW, providing adequate power for heavy-duty HVAC applications.
Q: What protection level is offered by the Danfoss FC-102P18KT4E20H1XGXXXXSXXXXAXBXCXXXXDX drive?
A: It features a protection level of IP20, offering basic touch protection but limited dust and water resistance.
Q: Does the FC-102P18KT4E20H1XGXXXXSXXXXAXBXCXXXXDX drive come with a local control panel?
A: A graphical local control panel is included for onsite monitoring and setup.
Q: What type of RFI filter is present in the Danfoss FC-102P18KT4E20H1XGXXXXSXXXXAXBXCXXXXDX?
A: The drive provides RFI Class A1/B (C1) filtering to help reduce electromagnetic interference.
