Product Description:

The FC-102P15KT4P55H1XGXXXXSXXXXALBXCXXXXDX is an AC variable-frequency drive manufactured by Danfoss for the VLT FC 102 HVAC Drives series. The unit adjusts induction-motor speed in air-handling units, pumps, and other building services so control systems can match airflow or water flow to changing demand and reduce energy use in automated HVAC infrastructure. It fits mechanical rooms and process skids where ventilation or chilled-water circulation must synchronize with supervisory PLCs and building automation routines across supply-air and water-circulation circuits.

Rated output is 15 kW, equivalent to 20 HP, which suits medium fan sections and booster pumps in commercial plant service where stable motor control is needed during normal load changes. The drive accepts 380–480 VAC on a three-phase power bus and mounts behind an open backplate with an IP55 / Type 12 enclosure rating. With no brake chopper, braking energy must be handled by external equipment rather than by an integrated resistor circuit. Adaptation A provides standard cable entries, while the B, D, C0, C1, C software, and mains options are not installed. The internal RFI filter supports basic EMC control, and the backplate arrangement suits enclosed electrical areas that need direct mounting and orderly cable routing.

BMS connectivity is provided by the A-option card, a PROFINET MCA 120 interface that exchanges setpoints and status data over Ethernet. For on-site operation, a graphical local control panel presents parameters and live data without requiring separate setup hardware. The mechanical arrangement uses Frame A5, supporting open-back cooling and top-entry cabling on the back-plate layout. The drive also uses an uncoated PCB, so routine care is centered on clean cabinet conditions, terminal checks, and the removal of dust that could collect around control and power connections.