Product Description:

The FC-102P15KT4E66H3XGX1XXSXXXXAXBXCXXXDX is an AC variable frequency drive manufactured by Danfoss for the VLT FC 102 HVAC Drives series. The unit is designed for building automation and light industrial systems that require variable-speed control of centrifugal fans, pumps, and compressors. It converts a fixed utility supply into a modulated output that adjusts motor speed according to load demand. Precise speed regulation can reduce unnecessary energy consumption while helping ventilation, pressure, and flow systems maintain stable operating conditions. Onboard control interfaces also allow the drive to exchange commands and operating data with supervisory control systems.

The electrical section accepts 380–480 VAC from a three-phase power network, making the drive suitable for common industrial power systems. Its continuous output is rated at 15 kW, which corresponds to 20 HP for medium-sized air-handling equipment, circulation pumps, and booster stations. The polyester enclosure carries an IP66 / NEMA 4X rating, protecting internal components against dust and washdown water. This enclosure allows wall mounting in suitable locations without requiring a separate protective cabinet. The configuration does not include a brake chopper, so deceleration energy must be managed through the motor or compatible external equipment. Its printed circuit boards are not conformally coated, which should be considered when selecting an installation location with airborne moisture or corrosive contaminants.

The built-in mains disconnect isolates the connected power circuit and provides a local means of disconnecting the drive from its incoming supply. Local operation, parameter adjustment, and diagnostic viewing are handled through the graphical local control panel, which presents operating values and drive settings through a visual interface. Conducted electrical emissions are reduced by an integrated RFI Class A1/B (C1) filter, supporting installations that require C1 filtering without an additional plug-in board. The numeric designator 102 indicates the platform’s HVAC-oriented control functions and sensor scaling. Standard cable entries provide defined routing points for incoming power, motor conductors, and control wiring. The absence of a brake chopper also means that stopping profiles must remain compatible with the connected motor, load inertia, and any external energy-management equipment.