FC-102P15KT4E20H1XGXXXXSXXXXA Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
6 Minutes
37 Seconds
The Danfoss FC-102P15KT4E20H1XGXXXXSXXXXA is part of the VLT FC 102 HVAC Drives series and features a power rating of 15 kW, or 20 horsepower. It runs on three phase power with a voltage range of 380 to 480 VAC and offers IP20 chassis protection. The drive is equipped with a graphical local control panel and includes RFI Class A1/B filtering.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-102P15KT4E20H1XGXXXXSXXXXA is an AC variable frequency drive manufactured by Danfoss for the VLT FC 102 HVAC Drives series. The unit converts fixed-frequency line power into a variable-frequency output that controls centrifugal fans, pumps, and compressors in commercial air-handling and chilled-water systems. It adjusts motor speed and torque to meet real-time heating, ventilation, and air conditioning demands, reducing unnecessary energy use when equipment operates below full capacity. The drive is intended for installation in an electrical enclosure and can interface with building automation controllers for coordinated system operation.
The drive accepts line power ranging from 380–480 VAC and uses an IGBT bridge to provide up to 15 kW of continuous motor output, corresponding to 20 hp. It operates with three-phase power and connects to standard industrial supplies running at 50 or 60 Hz. The IP20 chassis protection helps prevent accidental finger contact with internal components, but the unit must be mounted inside a suitable panel for adequate protection from dust and moisture. The housing does not include an integrated line disconnect, so appropriate upstream disconnects and fuses are required. Its printed circuit boards are uncoated, making proper enclosure selection important in locations where airborne moisture or contaminants may be present. Parameter menus are available in multiple languages through the Standard Language Pack, allowing operating information and settings to be displayed in the selected language.
Incoming power and motor conductors pass through standard cable entries provided by Adaptation A, supporting organized routing within the enclosure. The front-mounted graphical local control panel allows users to issue commands, view operating trends, and copy parameter sets without separate programming equipment. Conducted electrical emissions are limited by an integrated RFI Class A1/B (C1) filter, which helps reduce interference with nearby equipment and connected building control networks. The drive has no brake chopper, so the connected mechanical system must absorb excess energy produced during deceleration. Its internal series identifier is 102, which corresponds to the FC 102 drive platform and its associated control architecture.
Frequently Asked Questions about FC-102P15KT4E20H1XGXXXXSXXXXA:
Q: What is the supported mains voltage range for the FC-102P15KT4E20H1XGXXXXSXXXXA drive?
A: The FC-102P15KT4E20H1XGXXXXSXXXXA supports a mains voltage range of 380 to 480 VAC for its operation.
Q: What is the power rating of the Danfoss FC-102P15KT4E20H1XGXXXXSXXXXA drive?
A: This drive has a power rating of 15 kW, delivering efficient performance in HVAC systems.
Q: What type of power phase does the FC-102P15KT4E20H1XGXXXXSXXXXA accept?
A: The FC-102P15KT4E20H1XGXXXXSXXXXA provides three phase power input, making it suitable for industrial installations.
Q: What is the protection level provided by the FC-102P15KT4E20H1XGXXXXSXXXXA HVAC drive?
A: Protection level for this unit is IP20 / Chassis, offering basic protection against solid objects.
Q: What type of control panel comes with the FC-102P15KT4E20H1XGXXXXSXXXXA?
A: The drive includes a Graphical Local Control Panel (LCP) for user-friendly interface and parameter settings.
