FC-102P11KT4E55H1XGXXXXSXXXXAXBXCXXXXDX Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
3 Minutes
15 Seconds
The Danfoss FC-102P11KT4E55H1XGXXXXSXXXXAXBXCXXXXDX is a VLT FC 102 HVAC Drive with a power rating of 11 kW and supports three phase power at 380 to 480 VAC. It features a graphical local control panel, an IP55 / Type 12 protection level, and has a horse power rating of 15 HP. The drive is equipped with an RFI filter rated to Class A1/B (C1) and includes standard cable entries.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-102P11KT4E55H1XGXXXXSXXXXAXBXCXXXXDX is a variable frequency drive manufactured by Danfoss for the VLT FC 102 HVAC Drives series. It converts fixed-frequency mains into a controlled output that regulates the speed of fans, pumps, and compressors used in building automation. This function allows an energy-management system to match airflow or fluid flow to load demand, improving efficiency. In HVAC service, it lets connected motors run only as fast as the load requires instead of operating continuously at full line frequency.
The power section is rated at 11 kW, equal to 15 HP, which suits mid-size air handlers and booster pumps. It accepts 380 - 480 VAC on three-phase power, so it can connect directly to common commercial feeders. An internal filter classified as RFI Class A1/B (C1) limits conducted emissions. The configuration lists no A option, no B option, and no mains option, so the base power terminals are used without additional disconnects. Dynamic braking hardware is absent because the unit has no brake chopper. Adaptation B is set to no adaptation, so the mechanical interfaces remain in the standard form.
The enclosure carries an IP55 / Type 12 rating that protects against dust and water jets, allowing wall mounting in mechanical rooms without a separate cabinet. Operators program the unit through the graphical local control panel, and menus are provided by the standard language pack. Field wiring enters through standard cable entries, and control logic uses the latest standard software release. The C option software slot is empty, and the C0 MCO, C1, and D positions have no option installed. The printed circuit board is not coated, so protection depends on the enclosure rather than on a conformal coating. This arrangement leaves the standard terminal layout unchanged.
Frequently Asked Questions about FC-102P11KT4E55H1XGXXXXSXXXXAXBXCXXXXDX:
Q: What is the power rating of the FC-102P11KT4E55H1XGXXXXSXXXXAXBXCXXXXDX drive?
A: The FC-102P11KT4E55H1XGXXXXSXXXXAXBXCXXXXDX has a power rating of 11 kW, making it suitable for medium-sized HVAC systems.
Q: What protection level is offered by the FC-102P11KT4E55H1XGXXXXSXXXXAXBXCXXXXDX?
A: This drive provides protection rated at IP55 / Type 12, allowing installation in environments exposed to dust and water jets.
Q: What mains voltage does the FC-102P11KT4E55H1XGXXXXSXXXXAXBXCXXXXDX support?
A: The FC-102P11KT4E55H1XGXXXXSXXXXAXBXCXXXXDX supports a mains voltage range of 380 to 480 VAC.
Q: What type of control panel is included with the FC-102P11KT4E55H1XGXXXXSXXXXAXBXCXXXXDX?
A: This model is equipped with a graphical local control panel, making configuration and monitoring straightforward for users.
Q: What type of RFI filter is built into the FC-102P11KT4E55H1XGXXXXSXXXXAXBXCXXXXDX drive?
A: The FC-102P11KT4E55H1XGXXXXSXXXXAXBXCXXXXDX features an integrated RFI filter rated at Class A1/B (C1) for electromagnetic compatibility.
