FC-102P11KT4E21H3XGXXXXSXXXXAXBXCXXXXDX Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
6 Minutes
49 Seconds
The Danfoss FC-102P11KT4E21H3XGXXXXSXXXXAXBXCXXXXDX is part of the VLT FC 102 HVAC Drives series and supports three phase power with a mains voltage range of 380 to 480 VAC. It features a power rating of 11 kW, a graphical local control panel, and provides IP21/Type 1 protection for dry room mounting. The drive offers RFI Class A1/B filtering and has a 15 HP output.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-102P11KT4E21H3XGXXXXSXXXXAXBXCXXXXDX is an AC drive manufactured by Danfoss for the VLT FC 102 HVAC Drives series. Within HVAC installations, the unit regulates the speed of induction motors that operate fans, pumps, and compressors. This regulation allows building automation systems to adjust airflow or fluid flow according to real-time demand, reducing unnecessary motor operation in industrial and commercial climate-control systems.
The drive delivers a continuous power output of 11 kW, giving it the capacity to run medium-sized blower or pump motors without derating. It accepts a mains supply of 380–480 VAC from a three-phase power supply, allowing direct connection to typical 400 V building distribution networks. Its IP21 / Type 1 enclosure provides protection against accidental finger contact and vertically falling water drops when installed in a clean electrical room. The internal design includes no brake chopper, so regenerative energy cannot be dissipated within the drive. An external braking arrangement is required when an application needs rapid motor deceleration. The drive is intended for dry indoor mounting, and the installation must provide the airflow needed to maintain its thermal performance.
A graphical local control panel provides access to operating parameters and start-stop controls directly at the drive. The panel allows operating data and drive status information to be viewed without relying solely on a connected building automation system. Standard cable entries simplify the routing of mains, motor, and control wiring into the enclosure. The built-in RFI Class A1/B (C1) filter limits conducted electrical interference and reduces the need for a separate line filter. The drive does not include a mains disconnect, so an upstream switching device must provide electrical isolation. No adaptation B is installed, and the printed circuit boards have a plain finish rather than a conformal coating for indoor service. Auxiliary option slots A, B, C0, C1, and D are vacant, while the Standard Language Pack supports access to the available control menus.
Frequently Asked Questions about FC-102P11KT4E21H3XGXXXXSXXXXAXBXCXXXXDX:
Q: What type of power phase is supported by the FC-102P11KT4E21H3XGXXXXSXXXXAXBXCXXXXDX?
A: This drive supports three-phase power input for compatibility with industrial power systems.
Q: What is the power rating of the Danfoss FC-102P11KT4E21H3XGXXXXSXXXXAXBXCXXXXDX?
A: The power rating for this model is 11 kW, enabling it to drive motors for demanding HVAC applications.
Q: What mains voltage is required by the FC-102P11KT4E21H3XGXXXXSXXXXAXBXCXXXXDX?
A: The FC-102P11KT4E21H3XGXXXXSXXXXAXBXCXXXXDX is designed for operation on 380 - 480 VAC mains voltage.
Q: What is the protection level of this Danfoss FC 102 HVAC Drive?
A: It is built with IP21 / Type 1 protection level, providing basic protection against solid objects and limited moisture.
Q: What type of control panel does the FC-102P11KT4E21H3XGXXXXSXXXXAXBXCXXXXDX feature?
A: A graphical local control panel (LCP) is included with this model for easy configuration and operation.
