FC-102P11KT4E20H1XXXXXXSXXXXAXBXCXXXXDX Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
6 Minutes
11 Seconds
The Danfoss FC-102P11KT4E20H1XXXXXXSXXXXAXBXCXXXXDX is part of the VLT FC 102 HVAC Drives series. It features a power rating of 11 kW, supports three phase power at 380 to 480 VAC, and has a 15 HP output. The drive comes with an IP20 protection level and is intended for normal cabinet mounting in A, B, or C frames.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-102P11KT4E20H1XXXXXXSXXXXAXBXCXXXXDX is an AC variable-frequency drive manufactured by Danfoss for the VLT FC 102 HVAC Drives series. It uses closed-loop speed control to regulate fans, pumps, and compressors in building automation systems. By adjusting motor frequency to match demand, the drive can reduce energy consumption compared with fixed-speed starters. Its control functions support applications that require steady pressure, airflow, temperature, or circulation under changing load conditions.
The power section supplies up to 11 kW, which corresponds to 15 HP of continuous mechanical output. It accepts a mains voltage range of 380–480 VAC and operates with three-phase power, allowing direct connection to typical industrial distribution systems. The drive has an IP20 chassis that protects against accidental contact with internal electrical parts but does not provide protection from water. Installation in dusty, damp, or wet areas therefore requires a suitable cabinet. The unit does not include a brake chopper, so applications with substantial regenerative energy may require controlled deceleration or an external braking arrangement. A local control panel is also not included, so operating commands and parameter access must be provided through an appropriate remote interface or compatible optional panel.
Conducted electromagnetic interference is reduced by an integrated RFI Class A1/B (C1) filter, supporting installation on supply networks with applicable emission limits. Power and control wiring use standard cable entries, allowing cables to pass through the designated gland plate without specialized routing hardware. The drive supports normal cabinet mounting for A, B, and C frames, allowing it to attach to compatible VLT backplates without additional mounting brackets. Its printed circuit boards are not coated, so the surrounding air should be kept free of corrosive gases, conductive dust, and excessive moisture. The standard language pack supports access to operating menus through a compatible control interface. The absence of additional electronic plug-ins keeps the installed configuration focused on core HVAC motor-control functions while leaving system communication dependent on the available standard connections.
Frequently Asked Questions about FC-102P11KT4E20H1XXXXXXSXXXXAXBXCXXXXDX:
Q: What is the power rating of the Danfoss FC-102P11KT4E20H1XXXXXXSXXXXAXBXCXXXXDX drive?
A: The FC-102P11KT4E20H1XXXXXXSXXXXAXBXCXXXXDX operates at a power rating of 11 KW.
Q: What type of power phase does the FC-102P11KT4E20H1XXXXXXSXXXXAXBXCXXXXDX support?
A: This HVAC drive is designed for use with three-phase power systems.
Q: What protection level does the Danfoss FC-102P11KT4E20H1XXXXXXSXXXXAXBXCXXXXDX provide?
A: The drive features an IP20 protection level and a chassis design.
Q: What mains voltage range is supported by the FC-102P11KT4E20H1XXXXXXSXXXXAXBXCXXXXDX?
A: It accepts a mains voltage range between 380 and 480 VAC.
Q: Does the FC-102P11KT4E20H1XXXXXXSXXXXAXBXCXXXXDX include any RFI filtering, and if so, what class?
A: This model includes an RFI filter rated at Class A1/B (C1).
