FC-102 FC-102P7K5T4E55H2XG Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The Danfoss FC-102 FC-102P7K5T4E55H2XG is part of the VLT FC 102 HVAC Drives series and operates with a motor power of 7.5 kW and AC line voltage of 3 x 380-480 V AC. It features a protection rating of IP55 / Type 12, an LCP 102 graphical control panel, and delivers continuous output currents of 16 A at 380-440 V and 14.5 A at 441-480 V. The drive weighs 14.2 kg and measures 420 mm in height, 242 mm in width, and 200 mm in depth.
Internal Product Review
The FC-102 FC-102P7K5T4E55H2XG is a well-executed Danfoss VLT FC 102 HVAC drive for 7.5 kW motor control on 3 x 380-480 V AC systems. Safe Stop and IP55 / Type 12 protection make the unit especially appealing for dependable HVAC service in demanding indoor environments. The LCP 102 graphical control panel adds strong commissioning value and rounds out a very capable drive package.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-102 FC-102P7K5T4E55H2XG is a Danfoss variable frequency drive in the VLT FC 102 HVAC Drives series. The drive belongs to the VLT HVAC Drive product group and uses series identifier 102. It controls the speed of centrifugal fans, pumps, and compressors in building-management systems. By converting fixed-frequency mains power into a regulated three-phase output, the drive supports energy-efficient operation in air-handling and chilled-water systems while maintaining motor torque during dynamic load changes.
The input section accepts 3 x 380–480 V AC, removing the need for external transformers in compatible installations. When the supply voltage is between 380 V and 440 V, the inverter delivers a continuous output current of 16 A. The continuous output current decreases to 14.5 A at 441–480 V because of the higher motor-terminal voltage. A line-side supply current of 15.8 A must be considered when selecting cables and protective devices. The unit supports motors rated up to 7.5 kW, matching common 10 hp HVAC induction motors. A Safe Stop function disables motor torque without disconnecting the mains supply, while the built-in Class A2 (C3) RFI filter limits conducted electrical emissions. The LCP 102 graphical local control panel provides access to parameters, operating data, and trend information from the enclosure door.
The drive provides an overload capacity of 110% for 1 minute every 10 minutes, allowing brief load peaks before returning to continuous operation. Its IP55 / Type 12 housing protects the internal electronics against dust and low-pressure water jets. Internal switching devices dissipate approximately 225 W at full load, so the installation must provide adequate heat removal. The aluminum A5 frame measures 420 mm high, 242 mm wide, and 200 mm deep, providing the physical dimensions needed for mounting and clearance planning. The drive has a transport mass of 14.2 kg, which must be considered when selecting mounting hardware and preparing the supporting surface.
