134L6625 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
MPN: FC-102P15KT4P55H1XGXXXXSXXXXALBXCXXXXDX
The Danfoss 134L6625 is part of the VLT FC 102 HVAC Drives series and operates at a power rating of 15 kW or 20 horsepower. It is designed for three phase power with a mains voltage range of 380 to 480 VAC, and features a graphical local control panel. The drive has an IP55 / Type 12 backplate protection level and includes a PROFINET MCA 120 option with RFI Class A1/B filtering.
Internal Product Review
The 134L6625 is a Danfoss VLT FC 102 HVAC drive rated for 15 kW. Three-phase 380 to 480 VAC input and PROFINET MCA 120 communication support smooth integration into modern building automation systems. IP55/Type 12 protection with a graphical local control panel makes this drive a strong choice for dependable HVAC control.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 134L6625 is a variable-frequency drive produced by Danfoss for the VLT FC 102 HVAC Drives series. It belongs to the VLT HVAC Drive product group and is intended for building automation systems. The drive regulates the rotational speed of supply-air fans, return-air fans, and hydronic pumps, allowing airflow or fluid flow to follow real-time thermal demand. Variable-speed operation also reduces unnecessary motor operation when the connected system requires less output.
The controller supplies a mechanical output of 20 HP, which corresponds to an electrical power rating of 15 kW. It operates from 380–480 VAC using three-phase power, eliminating the need for external phase conversion. Line-borne interference is attenuated by an integrated RFI Class A1/B (C1) filter, which helps the installation comply with EMC limits in commercial facilities. The enclosure is rated IP55 / Type 12, protecting internal assemblies against dust and low-pressure water jets in rooftop or mechanical-room environments. The drive does not include an internal brake chopper, so regenerative energy must be managed through the motor, process, or another suitable external arrangement. It also lacks an integrated mains disconnect, requiring a separate upstream disconnecting device.
Communication with supervisory controllers is handled through a PROFINET MCA 120 A-option card that supports real-time Ethernet messaging. Local setup, operating-status review, and fault navigation use the detachable graphical local control panel. Standard cable entries are provided through Adaptation A for routing power, motor, and control conductors into the enclosure. A backplate for Frame A5, B, and C enclosures supports rear mounting within the installation. The B, C0, C1, and D auxiliary slots are supplied without installed option cards, leaving those interfaces available for compatible additions. The printed circuit board is uncoated, so the installation environment should limit exposure to corrosive gases, persistent condensation, and chemically active airborne contaminants.
