131H3897 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
MPN: FC-102P15KT2E20H2XGXXXXSXXXXAXBXCXXXXDX
The Danfoss 131H3897 is a VLT FC 102 HVAC Drive with a power rating of 15 kW and supports 20 horsepower. It operates on 200 to 240 VAC three-phase power and has an IP20 chassis protection level. This drive features normal cabinet mounting for A, B, and C frames and is equipped with a graphical local control panel and an RFI filter.
Internal Product Review
The Danfoss 131H3897 is a VLT FC 102 HVAC drive designed for 200 to 240 VAC and three-phase power. A 15 kW / 20 HP rating gives the unit strong suitability for fan and pump duty with dependable load handling. The graphical local control panel and IP20/chassis construction support efficient commissioning and clean cabinet integration, making this drive a strong HVAC choice.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 131H3897 variable frequency drive is built by Danfoss as part of the VLT FC 102 HVAC Drives series. Within the VLT HVAC Drive product group, it serves as a speed controller for centrifugal fans, pumps, and compressors in automated heating, ventilation, and air conditioning systems. By converting fixed-frequency utility power into a regulated output, the unit allows building control networks to adjust motor speed in real time. This control helps maintain the required airflow or pressure while reducing energy use and mechanical wear in industrial automation environments.
Electrical capacity is rated at 20 HP, which corresponds to a continuous mechanical output of 15 kW. The input section accepts 200–240 VAC utility power and connects directly to the plant distribution system. Internally, the inverter generates sinusoidal pulse-width modulation that is delivered through a three-phase power output, providing controlled motor torque across the operating speed range. A built-in RFI filter attenuates conducted radio-frequency interference and helps the installation meet applicable electromagnetic compatibility requirements. Standard cabinet mounting for A, B, or C frames positions the heat sink inside the enclosure and requires sufficient clearance for cooling airflow and wiring access.
Adaptation A provides standard cable entries, allowing power and control conductors to enter the enclosure through the normal connection points. The operator interface is a graphical local control panel, which provides direct access to operating data, drive parameters, status information, and diagnostic messages without requiring a separate computer. The drive electronics use an uncoated printed circuit board, so the surrounding cabinet should protect internal components from excessive moisture, dust, and corrosive airborne contaminants. The drive has no brake chopper, which means an external braking resistor cannot be connected directly to the unit for dissipating regenerated energy. The enclosure has an IP20 chassis rating, protecting against accidental contact with internal electrical parts while requiring installation inside a suitable ventilated cabinet. The cabinet should also provide adequate spacing around the drive to support heat removal and prevent nearby equipment from obstructing airflow.
