131F4300 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
MPN: FC-102P4K0T4E21H2XGX1XXSXXXXAJBXCXXXXDX
The Danfoss 131F4300 is part of the VLT FC 102 HVAC Drives series and features a BACnet MCA 109 A option with a graphical local control panel. It is designed for dry room mounting in B, C, D, and E frames and supports three-phase power at 380 to 480 VAC. This drive is equipped with an IP21 protection level, a mains disconnect option, and includes an RFI filter.
Internal Product Review
The 131F4300 is a Danfoss VLT FC 102 HVAC drive built for 380-480 VAC three-phase power. BACnet MCA 109 communication and a graphical local control panel make commissioning and building-system integration especially efficient. IP21 / Type 1 protection and an integrated mains disconnect add practical value for dependable HVAC drive deployment.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 131F4300 is an AC variable frequency drive produced by Danfoss within the VLT FC 102 HVAC Drives series. It controls squirrel-cage induction motors used in air-handling units, pumps, and cooling towers. By adjusting motor speed to match demand, the drive allows building automation systems to regulate airflow or fluid flow while reducing unnecessary energy consumption. Its variable-speed operation also supports gradual acceleration and deceleration, which can reduce mechanical stress on connected equipment.
The drive uses three-phase power from a 380 to 480 VAC supply, matching the electrical service commonly available in commercial mechanical rooms. The housing provides an IP21 / Type 1 protection level that guards live parts against finger contact and protects the equipment from vertically dripping water. These protections make the enclosure suitable for indoor installation in controlled areas. Wiring passes through standard cable entries, providing conventional routing points for the incoming supply and motor conductors. An integrated mains disconnect allows the inverter to be electrically isolated without a separate disconnecting device. The drive does not include a brake chopper, so external braking equipment is required when an application produces regenerated energy during rapid deceleration. Its power board uses an uncoated printed circuit board, making dry indoor placement necessary to prevent moisture and airborne contaminants from reaching sensitive electronics. The drive supports mounting with B, C, D, or E frames.
The A-option slot contains a BACnet MCA 109 module, allowing the drive to communicate directly with building management networks that use BACnet/IP or MS/TP protocols. Local operation is provided through a graphical local control panel with a backlit display for viewing parameter menus, operating values, and drive status. This interface allows motor and process information to be reviewed at the installed unit without relying solely on the building management network. Conducted emissions returning toward the incoming power supply are reduced by the built-in RFI filter. This filtering supports electromagnetic compatibility when the drive is installed in a properly grounded metal enclosure. The configuration does not include additional B, C0, C1, or D option cards, and the Adaptation B position is empty.
