131F4141 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
MPN: FC-102P2K2T4E20H2XGXXXXSXXXXAJBXCXXXXDX
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
3 Minutes
18 Seconds
The Danfoss 131F4141 is part of the VLT FC 102 HVAC Drives series and operates on a three-phase power supply at 380 to 480 VAC. This drive features an IP20 protection level with normal cabinet mounting and includes a BACnet MCA 109 option. It also comes with a graphical local control panel and an integrated RFI filter.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 131F4141 variable-frequency drive is produced by Danfoss as part of the VLT FC 102 HVAC Drives series. It is intended for fan, pump, and compressor speed regulation in building automation, allowing energy-efficient adjustment of three-phase induction motors that serve air-handling and chilled-water systems. In these applications, the inverter adjusts motor speed to match changing demand instead of running connected equipment continuously at full output. This operating approach supports stable control in ventilation and fluid-circulation systems that experience varying load conditions during normal use.
This model communicates with building management systems through the BACnet MCA 109 fieldbus card and handles supply lines rated at 380 - 480 VAC. The power section is configured for three-phase power. Because no brake chopper is installed, it is suited to HVAC loads that do not require regenerative braking. The enclosure carries an IP20 / chassis rating, so it must be mounted inside a cabinet where touch protection is provided by the panel itself. Its printed circuit boards are not coated. Operators set parameters with the integrated graphical local control panel, and this keypad presents real-time values in plain text for local setup and monitoring. The drive ships without mains-side fuses or disconnects, and the software option slots C0, C1, and D remain unused.
Cable routing follows standard cable entries, and the heat-sink geometry supports normal cabinet mounting for A, B, and C frames without external brackets. Electromagnetic emission is limited by the integrated RFI filter, allowing the unit to share switchgear enclosures with low-signal devices. This can help reduce interference in panels that also contain communication or monitoring hardware. Adaptation B is set to no adaptation, and there are no B- or mains-option add-ons. The drive uses the latest standard software release.
Frequently Asked Questions about 131F4141:
Q: What mains voltage range is supported by the 131F4141 VLT FC 102 drive?
A: The 131F4141 drive supports mains voltages ranging from 380 to 480 VAC.
Q: What type of power phase does the 131F4141 VLT FC 102 require?
A: It is designed for three-phase power, making it suitable for most industrial HVAC systems.
Q: What communication option is included with the 131F4141 VLT FC 102 as the A Option?
A: This model comes equipped with a BACnet MCA 109 module as its A Option for communication.
Q: What type of local control panel is provided with the 131F4141 VLT FC 102?
A: The drive features a graphical local control panel (LCP) for user interface and operation.
Q: What protection level does the 131F4141 VLT FC 102 offer?
A: Protection for this unit is rated at IP20, intended for chassis mounting within a cabinet.
