131F0699 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
MPN: FC-102P2K2T2E21H2XGXXXXSXXXXAXBXCXXXXDX
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Danfoss 131F0699 is part of the VLT FC 102 HVAC Drives series and is designed for three phase power with a mains voltage of 200 to 240 VAC. It has an IP21 protection level, standard cable entries, and comes equipped with an RFI filter. The drive features a graphical local control panel and is intended for dry room mounting on B, C, D, and E frames.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 131F0699 is a variable frequency drive manufactured by Danfoss for the VLT FC 102 HVAC Drives series. As a dedicated HVAC controller, it converts fixed-frequency mains power into a variable-frequency output that lets building automation systems regulate centrifugal fans, circulating pumps, or condenser motors without mechanical dampers. The drive can be paired with air-handling units, chilled-water loops, and other building systems that require continuous speed adjustment to meet changing load demands. This variable-speed operation can reduce unnecessary motor output during periods of low demand while maintaining the required airflow or fluid circulation.
It accepts an input of 200–240 VAC from three-phase power, allowing direct connection to compatible distribution systems without a transformer. The built-in IP21 / Type 1 enclosure protects live parts against accidental finger contact and shields the internal components from vertically falling water drops, making the drive suitable for conditioned electrical rooms. An integrated RFI filter attenuates conducted emissions so the unit can operate near sensitive control electronics. Wiring passes through standard cable entries, matching the Adaptation A designation and providing conventional access for power and control conductors. Installation requires a dry indoor location with sufficient clearance for ventilation and cable routing. The supported B, C, D, and E mechanical frames provide mounting arrangements for the corresponding drive sizes within the product range.
The operator interface is a graphical local control panel that displays parameter menus, operating values, alarms, and real-time status without requiring an external programming device. The power stage has no brake chopper, so applications requiring rapid deceleration must use a separate braking arrangement that is appropriate for the connected motor and load. The drive uses an uncoated PCB, so it should not be installed in areas with persistent condensation, corrosive vapors, or high concentrations of airborne chemicals. Its enclosure and installation location should remain clean and dry to reduce the risk of contamination reaching the internal electronics. The unit belongs to the VLT HVAC Drive product group and carries Series Identifier 102, which places it within the FC 102 control platform.
