131F0454

Product Description:

The 131F0454 drive is a strong entry from Danfoss in the VLT FC 102 HVAC Drives collection. This unit stands out with a maximum outlet pressure of 100 barg (1450 psig) and an output speed topping out at 3000 rpm. A total weight of 4.4 kg (9.7 lbs) keeps handling simple during setup or replacement, while the geometric displacement of 6.3 cm³/rev spells out its performance credentials for users dealing with demanding systems. With a media temperature range of 2–50°C (37–122°F), the drive covers plenty of ground for everyday and specialized HVAC jobs where outside air or process gases could challenge regular gear.

The construction revolves around an AISI 304 housing with FFKM seals, locking out contamination even as process and ambient conditions swing around. Filtration comes rated 99.98% at 10 µm, helping take care of fine contaminants that might threaten efficiency over long runs. A sound pressure level of 76 dB(A) means operation won’t increase noise remarkably—important in building automation, control rooms, or high-traffic locations. The drive is built for ongoing industrial use, so even at the lowest point (a minimum outlet pressure of 30 barg (435 psig), 1000 rpm on speed), systems keep moving with less risk of lag or stalling. Material and design both line up for robust industrial automation and HVAC workflows where changes in pressure or moisture can be tough on lighter parts.

Mounting and interface points are typical for VLT FC models, making both new installs and swap-outs quick work. The balance between ruggedness and speed lets this drive keep smart buildings, large ducted air handlers, or manufacturing lines on track with fewer unscheduled breaks.