131B4217 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
MPN: FC-102P1K5T4E20H1XGXXXXSXXXXAXBXCXXXXDX
The Danfoss 131B4217 is part of the VLT FC 102 HVAC Drives series and operates with a mains voltage range of 380 to 480 VAC. It supports three-phase power and features a chassis with IP20 protection level. The drive includes a graphical local control panel and utilizes standard cable entries for cabinet mounting.
Internal Product Review
The 131B4217 is a Danfoss VLT FC 102 HVAC drive built for 380 - 480 VAC service and three-phase power systems. A graphical local control panel streamlines setup, and the RFI Class A1/B (C1) filter supports clean integration in HVAC installations. IP20 / chassis protection and standard cabinet mounting make the unit a dependable choice for panel-based drive applications.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 131B4217 is a variable frequency drive manufactured by Danfoss for the VLT FC 102 HVAC Drives series. Designed for fan, pump, and compressor applications, the unit converts fixed-frequency mains power into a regulated three-phase output that allows building automation systems to adjust motor speed according to operating demand. Variable-speed control can reduce unnecessary energy consumption when connected equipment does not need to operate at full capacity. The drive is intended for normal cabinet installation, with mounting space and ventilation arranged according to the applicable A, B, or C frame guidelines.
The drive accepts an input voltage range of 380-480 VAC through a three-phase power supply. When installed inside a suitable cabinet, its IP20 chassis provides protection against accidental contact with hazardous internal components while allowing ventilation through the enclosure. An internal RFI Class A1/B (C1) filter limits conducted electrical interference on the building power network. A front-mounted graphical local control panel supports parameter entry, operating-data review, and manual start or stop commands without requiring a separate interface. The cabinet must provide the airflow clearances associated with the selected frame so heat can move away from the power electronics during continuous operation.
The terminal block accepts control wiring through standard cable entries, which provide a conventional route for signal and control conductors. The power stage includes no brake chopper, making the drive suitable for fan, pump, and compressor loads that generally do not require rapid regenerative braking. Its printed circuit boards are uncoated, so the drive should be installed in a clean, dry, and filtered indoor cabinet that limits exposure to moisture and airborne contaminants. The standard language pack presents operating menus and parameter descriptions using the established terminology for this control platform. The base configuration does not include additional mains, communication, or adaptation modules, allowing required external controls to be selected separately for the installation. Wiring access should remain unobstructed so power and control conductors can be routed without interfering with the designated cooling paths.
