Product Description:

The FC301P2K2T4E20H1XGXXXXSXXXXAXBXCXXXXDX is a variable-frequency drive manufactured by Danfoss for the VLT FC 301 Automation Drives series. Designed for general-purpose motor control, it converts fixed industrial mains power into a regulated output that adjusts induction-motor speed in conveyors, pumps, fans, and similar equipment. The drive provides scalable torque and supports energy-efficient operation across automated production lines. Its chassis is intended for installation inside electrical panels used in process and material-handling machinery.

When connected to a three-phase 380–440 V supply, the inverter draws a continuous input current of 5.0 A and delivers 5.6 A to the motor terminals. Its rated mechanical output is 2.2 kW at 400 V. Apparent power reaches 3.9 kVA at that voltage, while a 460 V supply provides 3.8 kVA and 3.0 hp. The overall conversion efficiency is 0.97, which helps limit heat buildup inside the control cabinet. The chassis has an IP20 enclosure rating that protects against accidental contact with internal components but requires installation within a closed panel.

Electromagnetic compliance is supported by an integrated filter that meets EN 55011 Class A1/B emission limits and the EN/IEC 61800-3 Category 1/2 requirements, reducing the need for additional line components. The converter accepts a three-phase power supply and uses the compact A2 enclosure size with standard cable entries for straightforward gland-plate alignment. Thermal dissipation peaks at 88 W, allowing normal panel ventilation to remove operating heat. The drive does not include a brake chopper or the C1 harmonic-mitigation option. No mains option or local control panel keypad is installed. The printed circuit board is uncoated, so the enclosure should prevent exposure to excessive moisture, conductive dust, and corrosive airborne contaminants.