FC301-P5K5T4E20H1 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The Danfoss FC301-P5K5T4E20H1 is an automation drive from the VLT FC 301 Automation Drives series with a power rating of 5.5 kW and delivers 7.5 horsepower. It supports three phase power at 380 to 480 VAC and features a protection level of IP20 with a chassis enclosure. The drive is designed for normal cabinet mounting on A, B, and C frames and includes an RFI Class A1/B filter.
Internal Product Review
The FC301-P5K5T4E20H1 is a Danfoss VLT FC 301 automation drive built for three-phase power at 380 - 480 VAC. A 5.5 kW / 7.5 HP rating gives the drive a strong balance of capacity and control for demanding automation duty. IP20 / chassis protection supports clean panel integration and makes the drive a dependable choice for cabinet installations.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC301-P5K5T4E20H1 drive is an AC inverter manufactured by Danfoss for the VLT FC 301 Automation Drives series. It converts fixed-frequency mains power into a variable-frequency output that allows controllers to adjust induction motor speed in conveyors, pumps, compressors, and general process machinery. By regulating motor frequency and voltage, the unit provides controlled torque and improved energy efficiency in industrial automation applications that do not require the extended motion functions of the higher-level FC 302 line. Its control platform supports common variable-speed applications while maintaining stable motor operation under changing loads.
The drive supplies up to 7.5 HP of mechanical output, making it suitable for medium-frame IEC or NEMA motors used on small compressors and material-handling belts. Its continuous power rating is 5.5 kW, which indicates the sustained output capacity available under the applicable operating conditions. The input section accepts line voltages from 380–480 VAC, covering common 400 V and 460 V industrial power networks without requiring an autotransformer. Operation with three-phase power allows balanced current draw and reduces ripple on the DC link, helping the drive maintain stable motor flux during dynamic load changes. The IP20 chassis protects against accidental finger contact with live components, but the drive must be installed in a clean, nonconductive control enclosure.
The mechanical layout supports normal cabinet mounting for A, B, and C frames, allowing the drive to fit established panel arrangements across the supported frame range. The mounting configuration helps preserve orderly spacing between neighboring drives and provides suitable access for power and control wiring. Conducted emissions are reduced by an integrated RFI Class A1/B filter, which supports electromagnetic compatibility requirements in residential and light-industrial environments without requiring a separate filter. The control system uses vector algorithms to maintain constant torque at low frequencies, reducing the need for motor-mounted feedback in many conveyor and pump installations. This sensorless control approach allows the inverter to respond to load changes while keeping the motor speed aligned with the commanded operating point.
