FC-301PK75T4134L2186 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The Danfoss FC-301PK75T4134L2186 is an automation drive in the VLT FC 301 Automation Drives series with a power rating of 0.75 kW and supports three phase power at 380 to 480 VAC. It delivers an output current of 2.4 A, supports output frequencies from 0 to 590 Hz, and has an efficiency of 0.96. The drive also features two digital outputs and an analog output range of 0 to 20 mA or 4 to 20 mA.
Internal Product Review
The FC-301PK75T4134L2186 is a Danfoss VLT FC 301 automation drive with a 0.75 kW rating and 380–480 VAC input. A 0–590 Hz output frequency and 0.96 efficiency support smooth speed control and strong energy performance.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-301PK75T4134L2186 is an AC variable frequency drive produced by Danfoss for the VLT FC 301 Automation Drives series. The unit converts fixed three-phase mains power into a modulated output so automation controllers can vary induction motor speed in conveyors, pumps, and fans. By regulating voltage and frequency, it supports energy savings and reduces mechanical stress in applications that require precise process control. It occupies minimal cabinet space and interfaces with control panels through standardized analog and digital I/O provided by the base hardware.
On the input side, the drive accepts line voltages from 380–480 VAC and distributes this power across three phases. Under continuous load, it can deliver 2.4 A of output current, which is the maximum steady-state motor amperage available without derating. The synthesized output frequency is adjustable from 0–590 Hz, enabling oversynchronous operation for high-speed machine axes. Electrical conversion losses are limited, resulting in a full-load efficiency of 0.96. The power section supports applications up to 0.75 kW, making the device suitable for small centrifugal equipment. Two digital outputs provide operating status signals to external controllers. A scalable 0/4–20 mA analog channel supplies process feedback through a standard current signal.
Peak input current reaches 2.2 A during acceleration, permitting installation on appropriately rated light branch circuits. The thermal design limits power dissipation to 46 W at maximum load, so enclosure airflow can be sized for the resulting heat output. When driving motors rated at 1.0 HP, the drive supports flux mode operation from 0–300 Hz and maintains full output voltage across the motor terminals. The supply input accepts mains frequencies of 50/60 Hz with a tolerance of ±5%, allowing operation on common industrial power systems. Shielded motor cables may extend up to 50 m, while unshielded motor cables may extend up to 75 m. These cable-length limits help preserve signal quality and maintain suitable insulation performance between the drive and motor.
