FC-301PK75T4131B9058

Product Description:

Danfoss manufactured the FC-301PK75T4131B9058. A power module that can provide a rated output of 0.75 kW is in the center of this gadget. This power rating shows how much electricity the VFD can provide to a linked motor on a continuous basis, allowing for accurate speed and torque control. The drive is compatible with a variety of power systems since it runs on a three-phase supply voltage that ranges from 380 to 500 volts, a normal industrial voltage level. The FC-301PK75T4131B9058 is contained inside an IP20 compartment. While fingers and other solid items bigger than 12 mm are protected by this sort of enclosure, liquids and dust are only marginally protected. It is thus appropriate for use in comparatively hygienic and regulated surroundings, which are usually found in industrial settings such as factories or workshops where there is little exposure to adverse weather conditions. The gadget measures 272.5 mm in height, 115 mm in breadth, and 168 mm in depth. This small size and 4.6 kg weight make it simple to incorporate into a variety of industrial configurations, particularly in situations where space is limited.

The VFD is intended to function at temperatures between 0 and 50 degrees Celsius. The drive's electronic components must remain within this temperature range in order to function at their best and last a long time. Going beyond these restrictions might cause the gadget to overheat and break. The capacity to modify the output voltage's switching frequency is a crucial component of this VFD. 5 to 16 kHz is the switching frequency range provided by the FC-301PK75T4131B9058. This adaptability enables motor performance optimization, noise reduction, and motor loss reduction, especially in applications with lengthy motor connections. A 150% overload capacity is included in the drive to provide dependable performance even in the most taxing circumstances. In other words, it can withstand brief load spikes of up to 1.5 times its rated power for one minute every ten minutes.

This FC-301PK75T4131B9058 has two analog and six digital inputs. The VFD may accept discrete signals via digital inputs, which are usually utilized for mode selection or start/stop instructions. Continuous signals, which are often used for speed reference or feedback control, may be processed by the drive thanks to analog inputs. Flexible and personalized control techniques are made possible by these inputs, which make it easier to integrate with different automation systems and sensors. The VFD is compatible with the Modbus RTU protocol for data exchange and connectivity with other industrial equipment. Additionally, the drive has an integrated RFI filter. By suppressing electromagnetic interference produced by the VFD, this filter helps keep it from influencing nearby sensitive electrical devices.