FC-301PK75T4131B0918 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The Danfoss FC-301PK75T4131B0918 is part of the VLT FC 301 Automation Drives series and operates with a power rating of 0.75 kW and 1.0 HP. This drive supports three phase power with a mains voltage range of 380 to 480 VAC and handles a continuous output current of 2.4 A. It features a 12-bit analog output resolution and a maximum output frequency of 590 Hz.
Internal Product Review
The FC-301PK75T4131B0918 is a Danfoss VLT FC 301 automation drive rated at 0.75 kW. Efficiency at 0.96 and overload capability of 160% for 1 min/10 min support stable, responsive motor control in demanding duty cycles. A strong choice for compact automation systems, especially with output frequency up to 590 Hz.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-301PK75T4131B0918 is a variable frequency drive manufactured by Danfoss within the VLT FC 301 Automation Drives series. Designed for three-phase installations, it converts constant-frequency mains power into a regulated output that lets control systems vary induction motor speed and torque. By modulating voltage and frequency, the drive supports energy-efficient operation of conveyors, pumps, and ventilation equipment in industrial automation.
The inverter accepts a supply range of 380 – 480 VAC and delivers a continuous apparent power of 1.7 kVA. At the motor terminals, it can provide a steady 2.4 A while maintaining an efficiency of 0.96, so most input energy is available for mechanical work rather than being lost as heat. Digital control is handled through six inputs that tolerate up to 28 V DC and two transistor outputs that source 40 mA each for status signaling. The power section allows a 3% mains imbalance and limits internal losses to 46 W, reducing cabinet cooling demand. Flux control is available up to 300 Hz for closed-loop magnetization. The 0.75 kW power rating matches small-frame IEC motors. A 12-bit analog output reproduces key process variables for external monitoring equipment.
The maximum output frequency of 590 Hz permits overspeed applications such as high-speed spindles. The drive is sized for motors up to 1.0 HP and can withstand an overload of 160% for one minute in every ten-minute interval without tripping, supporting heavy startup loads. Motor leads may run up to 50 m with shielded cable or 75 m with unshielded cable, allowing the enclosure to be installed away from the machine. The available cable lengths provide flexibility when the motor and drive cannot be mounted near each other. The analog feedback channel provides the PLC with detailed operating data for monitoring motor speed or torque.
