FC-301PK75T2134L2700 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The Danfoss FC-301PK75T2134L2700 belongs to the VLT FC 301 Automation Drives series and is designed for use with three phase power at 200 to 240 VAC. It offers a power rating of 0.75 kW or 1.0 HP, with an efficiency of 0.95 at rated current. The drive has a continuous output current of 4.60 A and can handle up to 1.83 kVA apparent power at 230 V.
Internal Product Review
The FC-301PK75T2134L2700 is a Danfoss VLT FC 301 automation drive rated at 0.75 kW with a 200 - 240 VAC input range. Three-phase power and 0.95 efficiency at rated current support stable, energy-conscious motor control in light industrial duty. A 4.60 A continuous output current makes the unit a strong choice for dependable 1.0 HP drive performance.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-301PK75T2134L2700 is an AC variable frequency drive manufactured by Danfoss for the VLT FC 301 Automation Drives series. It converts the 200–240 VAC three-phase mains supply used in factories into a variable-frequency and variable-voltage waveform so that small induction motors can be accelerated, decelerated, or held at a fixed process speed. Integrated control terminals accept start, stop, and reference commands from PLCs, allowing the drive to regulate connected machinery without additional motion-control hardware.
With a 208 V supply, the inverter draws an apparent power of 1.66 kVA, and this value rises to 1.83 kVA when the line voltage increases to 230 V. These values support transformer and input-cable sizing. Continuous input current is limited to 4.10 A, while the inverter can deliver 4.60 A to the motor terminals. The efficiency at rated current is 0.95, which limits the amount of electrical energy converted into heat during operation. A high-voltage warning is issued at 405 V DC, and an overvoltage alarm activates at 410 V DC to protect the DC-link capacitors. Digital logic outputs can source 40 mA for feedback relays or indicator LEDs, while the 0.75 kW power rating supports fractional-kilowatt pump, fan, and conveyor applications.
The dynamic braking circuit becomes active at 365 V DC, diverting excess regenerative energy into an internal resistor during rapid deceleration. Rated mechanical output is 1.0 HP, providing compatibility with motors that use horsepower-based nameplate ratings. Shielded motor cables may run up to 50 m, while unshielded cables may extend to 75 m under the permitted installation conditions. Control wiring accepts conductor sizes from 0.25 mm² to 1.5 mm², accommodating fine-pitch I/O terminals as well as larger control conductors. The three-phase power topology supports balanced motor operation, and the available wiring ranges provide flexibility for installation inside automated control panels.
