FC-301PK75T2134L2624 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The Danfoss FC-301PK75T2134L2624 is part of the VLT FC 301 Automation Drives series and delivers a power rating of 0.75 kW, supporting a three-phase mains voltage of 200 to 240 VAC. The drive features a continuous output current of 4.60 Amps and a maximum efficiency of 0.95. It provides 4 programmable digital inputs with a maximum digital input voltage of 28 V DC.
Internal Product Review
The FC-301PK75T2134L2624 is a Danfoss VLT FC 301 automation drive designed for 200 - 240 VAC three-phase power. Rated at 0.75 kW with 160% overload capacity, the drive supports dependable motor control through demanding operating cycles. Efficiency at rated current of 0.95 makes the drive a strong option for energy-conscious automation systems.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-301PK75T2134L2624 is an AC variable frequency drive manufactured by Danfoss for the VLT FC 301 Automation Drives series. The unit converts three-phase 200–240 VAC mains power into a controlled output that adjusts motor speed in automated conveyors, mixers, and HVAC auxiliary systems. With a nominal capability of 1.0 HP, it is suitable for compact motor-driven equipment that requires adjustable speed and controlled acceleration. Its internal 301 identifier associates the model with the appropriate accessories and mechanical dimensions in the VLT AutomationDrive FC product group.
The drive has an output rating of 0.75 kW, making it suitable for small pumps, fans, and other loads that require moderate torque. On a 208 V feeder, the converter draws 1.66 kVA of apparent power while maintaining a continuous motor current of 4.60 A. Its rated-load efficiency is 0.95, which helps limit heat generation inside the control cabinet. Short-term process surges are supported by an overload capacity of 160% for one minute during each ten-minute operating period. This overload capacity allows the drive to accelerate inertial loads while remaining within its thermal limits. At 230 V, the apparent power demand increases to 1.83 kVA, which should be considered when selecting branch-circuit components.
The control section accepts four programmable logic inputs rated for 28 V DC, allowing direct connection to compatible sensors or PLC contacts. Internal carrier switching can operate at frequencies up to 110 kHz, allowing a balance between audible motor noise and switching losses. The steady-state input current is 4.1 A and can rise to 4.5 A during acceleration. Motor current can reach 5.1 A during the same short-term operating interval. Power dissipation is limited to 54 W, so the control panel requires only moderate ventilation under normal installation conditions. The drive permits two power-up cycles per minute to reduce stress on its internal capacitors. Its compact chassis supports installation in light-to-medium automation systems where panel space and thermal management are important considerations.
