FC-301PK75T2131B8963 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The FC-301PK75T2131B8963 is an automation drive from Danfoss and part of the VLT FC 301 Automation Drives series. It offers a power rating of 0.75 kW and supports a mains voltage of 200 to 240 VAC with three phase power. The drive has a continuous output current of 4.6 A, a maximum output frequency of 590 Hz, and operates with an efficiency of 0.95.
Internal Product Review
The FC-301PK75T2131B8963 is a Danfoss VLT FC 301 automation drive built for three-phase power on 200 to 240 VAC systems. Rated at 0.75 kW with 0.95 efficiency, the unit delivers efficient power conversion and dependable control performance. A 590 Hz maximum output frequency is a strong performance advantage.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-301PK75T2131B8963 variable frequency drive is produced by Danfoss for the VLT FC 301 Automation Drives series. It belongs to the VLT AutomationDrive FC product group and is intended to regulate the speed of three-phase induction motors in automated conveyors, pumps, and ventilation equipment. By altering output frequency while keeping motor torque under control, the drive allows machinery to match process demand and minimize mechanical stress. The unit also meets Overvoltage Category III installation requirements for use in industrial panels.
The input section draws a continuous current of 4.1 A from a 200–240 VAC mains supply, and the inverter can deliver up to 4.6 A to the motor terminals under rated load. Internal power loss is limited to 54 W, so the cabinet requires only modest cooling airflow. A conversion efficiency of 0.95 indicates that most of the absorbed energy reaches the motor instead of being dissipated as heat. Frequency synthesis reaches a maximum of 590 Hz, supporting high-speed fan or spindle applications. The drive maintains flux-control accuracy up to 300 Hz to keep the motor within its magnetic limits. Control inputs accept 24 V logic with a peak input voltage of 28 V DC. Shielded motor cables may extend up to 50 m, while unshielded cables may extend up to 75 m where electromagnetic compatibility requirements permit their use.
The drive provides a mechanical output of 1.0 HP, corresponding to a continuous electrical output of 0.75 kW. This capacity suits small blowers and pumps that require frequent starts, with support for up to two power-ups per minute without derating. Phase imbalance must remain within 3.0% to prevent excessive current in any line conductor on the three-phase bus. If the system voltage rises beyond the permitted range, the inverter activates overvoltage protection to protect the DC link. Dynamic braking manages energy returned by the motor during deceleration or other regenerative operating conditions. Proper cable selection and balanced input power help the drive maintain stable motor control across its supported operating range.
