FC-301PK55T4134L2713 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Danfoss FC-301PK55T4134L2713 is part of the VLT FC 301 Automation Drives series and has a power rating of 0.55 kW with a maximum output frequency of 590 Hz. It operates on three-phase power with a mains voltage range of 380 to 480 VAC and supports up to 4 programmable digital inputs. The drive's efficiency at rated current is 0.95 and it features a maximum power cable size of 4 mm².
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-301PK55T4134L2713 is a frequency converter produced by Danfoss for the VLT FC 301 Automation Drives series. Installed between the mains supply and an induction motor, it modulates electrical power to control shaft speed and torque in automated machinery such as pumps, fans, and conveyors. The converter can connect to panel I/O and compatible fieldbus options for closed-loop control. Its compact enclosure also supports installation in control panels where mounting space is limited.
The input section is designed for a three-phase mains supply ranging from 380–480 VAC. At the nominal 400 V level, the converter draws an apparent power of 1.3 kVA. Its motor output is rated at 0.75 HP, which corresponds to a continuous electrical output of 0.55 kW. The unit reaches an efficiency of 0.95 at rated current, limiting the amount of input energy converted into internal heat. Under flux-vector control, the output frequency can reach 300 Hz for motors that require a broad operating range. User-adjustable parameters permit a maximum output frequency of 590 Hz for compatible high-speed motors. The selected motor and operating settings must remain within the applicable voltage, current, and frequency limits.
The power stage draws a nominal input current of 1.6 A and supplies a nominal output current of 1.8 A to the motor terminals. Heat dissipation under maximum load is limited to 42 W, so appropriate panel airflow can remove the generated heat. The power terminals accept conductors with cross-sectional areas up to 4 mm², allowing the mains and motor wiring to be secured directly to the converter. Built-in protective thresholds monitor the DC bus during operation. The brake chopper activates at 728 V DC, the high-voltage warning occurs at 810 V DC, and the overvoltage alarm trips at 820 V DC. The control interface provides four digital inputs and can be expanded to five inputs when the supported configuration is used. These inputs allow external switches, sensors, and control outputs to issue operating commands to the drive.
