FC-301PK55T2134L2931 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Danfoss FC-301PK55T2134L2931 is part of the VLT FC 301 Automation Drives series and operates at a power rating of 0.55 kW with three phase power. It supports mains voltages from 200 to 240 VAC and has an output current of 3.5 Amps. The drive features a maximum output frequency of 590 Hz and an efficiency of 0.95.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-301PK55T2134L2931 is an AC variable frequency drive produced by Danfoss for the VLT FC 301 Automation Drives series. The unit converts fixed-frequency mains power into a controlled output that allows automation controllers to match motor speed to changing load demands in conveyors, pumps, and material-handling equipment. By integrating supply, control, and feedback connections within a compact chassis, the drive simplifies installation while providing the analog and digital interfaces needed for closed-loop industrial motion. Its adjustable output supports processes that require controlled acceleration, deceleration, and steady operation rather than direct full-speed motor starting.
The input accepts a nominal line voltage of 200 to 240 VAC and draws up to 3.2 A from a three-phase source. Its apparent input power is 1.39 kVA, and the permitted supply frequency is 50/60 Hz with a tolerance of ±5%. Internal power conversion reaches an efficiency of 0.95, helping reduce the heat produced during normal operation. The analog feedback ports deliver either 0 to 20 mA or 4 to 20 mA signals, while the digital output channel supplies 40 mA for status signaling. An auxiliary 24 V terminal can provide 200 mA to external sensors and other compatible control devices. The inverter varies the motor-terminal voltage from 0% to 100% of the incoming supply and provides 3.5 A of continuous output current. Carrier-based flux control supports a maximum output frequency of 590 Hz. Shielded motor cables may be up to 50 m long, while unshielded cables may extend to 75 m without exceeding the drive’s stated limits.
Mechanical output is rated at 0.55 kW, which is equivalent to 0.75 HP, making the drive suitable for small induction motors used in auxiliary plant equipment. In flux-control mode, the control loop can command frequencies up to 300 Hz, supporting high-speed spindle or blower applications that operate above the motor’s base frequency. Thermal power loss is limited to 42 W, which reduces the heat load inside the control cabinet and supports cooling through natural airflow. The available signal channels allow a connected controller to manage run permission, speed references, and diagnostic status without requiring separate interface hardware.
