FC-301PK55T2134L2895 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The Danfoss FC-301PK55T2134L2895 is a three-phase automation drive that is part of the VLT FC 301 Automation Drives series. It offers a power rating of 0.55 kW and supports a mains voltage range of 200 to 240 VAC. The drive features a max output frequency of 590 Hz and a rated output current of 3.5 A.
Internal Product Review
The FC-301PK55T2134L2895 is a Danfoss VLT FC 301 automation drive built for 200 - 240 VAC three-phase power. A 0.55 kW rating and 590 Hz maximum output frequency support precise speed regulation across compact automation equipment. Efficiency of 0.95 and true power factor of at least 0.9 make the drive a very capable choice for dependable performance.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-301PK55T2134L2895 variable frequency drive is manufactured by Danfoss and belongs to the VLT FC 301 Automation Drives series. Intended for speed regulation of three-phase induction motors in automated machinery, the unit converts fixed utility power into a modulated output that allows control systems to match motor torque and speed to process demand. Its compact frame supports installation inside machine cabinets with limited space and cooling capacity. The drive is suitable for low-power conveyors, pumps, and ventilation fans that require straightforward setup and variable-speed operation.
On the supply side, the drive accepts 200–240 VAC three-phase power at 50 or 60 Hz with a frequency tolerance of ±5%. It tolerates a phase imbalance of up to 3.0% without tripping and draws a maximum input current of 3.2 A. The inverter section delivers a rated output current of 3.50 A to the motor terminals. Apparent power demand reaches 1.39 kVA at 230 V, while the mechanical output is rated at 0.55 kW (0.75 HP). Output voltage can reach 100% of the incoming line voltage, allowing the drive to supply full motor voltage across the commanded operating range. Power cycling is limited to two power-ups per minute. Motor cables may extend up to 50 m when shielded or 75 m when unshielded, giving installers flexibility when arranging the drive and motor within larger machinery.
The fundamental flux setpoint can be increased to 300 Hz, while the synthesized carrier pulses support commanded motor frequencies up to 590 Hz. During continuous operation, the drive dissipates 42 W as heat, which must be considered when sizing cabinet ventilation and maintaining suitable internal temperatures. Overall electrical efficiency is 0.95, and the true power factor is at least 0.9. These electrical characteristics limit conversion losses and reactive demand during constant-torque operation. When long motor cables are required, integrated filter algorithms help reduce reflected overvoltage and maintain acceptable voltage-rise stress on standard IEC motor windings. The available shielded and unshielded cable lengths also allow routing choices based on electromagnetic compatibility requirements and the physical arrangement of the equipment.
