FC-301PK37T4131X7272
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Danfoss FC-301PK37T4131X7272 is part of the VLT AutomationDrive FC 301 Series, featuring an enclosure protection rating of IP20. This drive delivers an efficiency of 93.0%, with a continuous output current of 1.3A at 380-440V and an intermittent output current of 2.1A. With its light construction, this device is easy to install.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-301PK37T4131X7272 is a precise and versatile FC-301 converter manufactured by Danfoss under the VLT automation series. With its powerful 301 drive, this device uses voltage vector control as its main control principle. With this type of control principle, the FC-301PK37T4131X7272 can reliably handle both three-phase asynchronous and permanent-magnet (PM) motors. The sensing principle for 301 drives relies on the DC link current measurement or motor phase. To accurately detect short-circuit, the FC-301PK37T4131X7272 is equipped with a current transducer and a desaturation protection with feedback. Because of its ability to perform variable control of motor parameters during operation and prevent short-circuit, the FC-301PK37T4131X7272 is useful for automation systems with 3-phase motors.
Based on its datasheet, the FC-301PK37T4131X7272 can achieve a typical shaft output of 0.37 kW or 370 watts. To ensure reliable operation of the FC-301PK37T4131X7272, the mains voltage supply must not exceed the recommended range of 380 to 480 volts. At this voltage range, the device can draw a continuous and intermittent current of 1.2 and 1.9 amperes, accordingly. Meanwhile, assuming favorable ambient conditions, the FC-301PK37T4131X7272 can reliably achieve a maximum output current of 2.1 amperes for sixty seconds. During steady-state operation, the FC-301PK37T4131X7272 can achieve an efficiency of 93% and a total power loss of 35 watts.
FC-301PK37T4 converters manufactured by Danfoss may come in different enclosure types: A1, A2, or A4/A5. Frequency converters with an A1 frame have a protection rating of IP 20, while A2 converters can have a protection category of IP 21. A4/A5 converters, on the other hand, can either have IP55 or IP66 protection categories. The output current of the FC-301PK37T4131X7272 can reach as high as 160% of the standard value for one minute in high-overload operation mode.
Frequently Asked Questions about FC-301PK37T4131X7272:
Q: What is the maximum altitude above sea level at which the FC-301PK37T4131X7272 will not derate?
A: The FC-301PK37T4131X7272 will not derate if installed up to a maximum altitude of 1000 m above sea level.
Q: What is the FC-301PK37T4131X7272’s energy efficiency class?
A: The FC-301PK37T4131X7272 has an IE2 energy efficiency class.
Q: What is the recommended voltage level for the FC-301PK37T4131X7272’s digital inputs?
A: The FC-301PK37T4131X7272’s digital inputs can have a voltage level of 0 to 24 VDC.
Q: What is the input resistance across each of the FC-301PK37T4131X7272’s digital inputs?
A: Each digital input terminal of the FC-301PK37T4131X7272 has an approximate input resistance of 4 kilo ohms.
Q: What modes are supported by the FC-301PK37T4131X7272’s analog inputs?
A: The FC-301PK37T4131X7272’s analog inputs support both voltage and current modes.
