FC-301PK37T2134L2698 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The Danfoss FC-301PK37T2134L2698 is part of the VLT FC 301 Automation Drives series and operates at 200 to 240 VAC three phase power. It offers a power rating of 0.37 kW, 0.50 horsepower, and an efficiency of 0.94. This drive has a rated output current of 2.4 amps and can deliver an analog output range of 0 to 20 mA or 4 to 20 mA.
Internal Product Review
The FC-301PK37T2134L2698 is a Danfoss VLT FC 301 automation drive with a 0.37 kW rating and three-phase power input. Operation remains efficient in light-duty motion applications, supported by 0.94 efficiency and a 0–590 Hz output frequency range. A rated output current of 2.4 A gives the drive a well-balanced performance profile for compact automation systems.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-301PK37T2134L2698 is an AC variable frequency drive manufactured by Danfoss for the VLT FC 301 Automation Drives series. The device receives fixed industrial voltage and produces variable voltage and frequency, allowing control systems to start, adjust, and stop small induction motors as operating conditions change. Its electronic speed regulation supports precise flow, pressure, and positioning control in compact conveyors, centrifugal pumps, and general OEM equipment without requiring a separate mechanical speed-control system.
The drive accepts three-phase input power at 200 to 240 VAC and 50/60 Hz ±5%, while drawing 2.2 A continuously and tolerating a mains phase imbalance of 3.0%. It converts the incoming power into a regulated output frequency of up to 590 Hz and an output voltage ranging from zero to 100% of the supply voltage, providing a broad adjustable speed range. Motor output is rated at 0.37 kW, which corresponds to 0.50 HP, and the drive supplies 2.4 A of continuous phase current. Apparent input demand reaches 0.96 kVA at 230 V. The drive operates with an efficiency of 0.94, limiting internal power dissipation to 29 W during rated operation. These electrical characteristics help reduce heat accumulation inside compact control enclosures while maintaining stable motor control.
The converter provides a 24 V auxiliary supply that can deliver up to 200 mA to connected field sensors and control devices. Its configurable analog feedback channel provides a 0/4 to 20 mA signal for compatible supervisory PLC inputs. Shielded motor cables may extend up to 50 m before additional output filtering is required, while unshielded cables may reach 75 m under the same condition. To protect the inrush-current network, the drive permits no more than two starts per minute. These limits allow cable routing, auxiliary loads, analog connections, and startup intervals to be planned according to the drive’s operating capabilities.
