FC-301PK37T2134L2663 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The Danfoss FC-301PK37T2134L2663 is part of the VLT FC 301 Automation Drives series and operates on three phase power with a mains voltage range of 200 to 240 VAC. It offers a continuous output current of 2.4 A and a power rating of 0.37 kW with a maximum output frequency of 590 Hz. This drive has an efficiency of 0.94 and supports an analog output resolution of 12 bits.
Internal Product Review
The FC-301PK37T2134L2663 is a Danfoss VLT FC 301 automation drive designed for 200 to 240 VAC service and rated at 0.37 kW. A strong impression comes from the 0.94 efficiency and 590 Hz maximum output frequency, which support clean motor control and solid response tuning. A well-executed drive for light-duty automation work, with performance that stands out in compact three-phase installations.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-301PK37T2134L2663 is a variable frequency drive produced by Danfoss and assigned to the VLT FC 301 Automation Drives series within the broader VLT AutomationDrive FC product group. The unit converts three-phase supply power into a pulse-width-modulated waveform that allows motor speed to follow process demand. This control can reduce energy use and mechanical stress in small conveyors, pumps, and ventilation equipment.
The drive supplies 0.96 kVA of apparent power with a continuous motor current of 2.4 A while drawing no more than 2.2 A from the mains. The input is rated for 200–240 VAC three-phase networks, and the inverter section operates with an efficiency of 0.94. The control electronics accept digital commands up to 28 V DC, enabling direct connection to most PLC output cards. The analog output channel has 12-bit resolution, and the carrier switching frequency can be set as high as 32 kHz to reduce motor noise. Flux-oriented control remains stable up to 300 Hz when additional low-speed torque is required. The mechanical output is rated at 0.50 HP, which corresponds to 0.37 kW. The continuous electrical ratings support variable-speed operation without exceeding the stated current limits during normal service.
The transistorized digital output can switch up to 40 mA, and event pulses can reach 110 kHz for encoder emulation or process feedback. Motor terminals support fundamental frequencies as high as 590 Hz, providing the speed range needed for high-velocity spindles. Shielded motor cable can be routed up to 50 m without exceeding EMC limits. Relay 1 handles 240 VAC at 2 A, providing an isolated contact for external coils or status lamps. Overall power dissipation is 29 W, which helps limit the cooling load in densely arranged control cabinets. The available digital, analog, pulse, and relay connections support integration with common automation controls and external signaling devices.
