FC-301PK37T2134G0677 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Danfoss FC-301PK37T2134G0677 is part of the VLT FC 301 Automation Drives series and has a power rating of 0.37 kW with a horsepower of 0.50 HP. It operates on three phase power with an input current of 2.20 A and a supply voltage of 200 to 240 VAC. The drive offers a maximum output frequency of 590 Hz, a flux mode frequency of 300 Hz, and a 0.94 efficiency.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-301PK37T2134G0677 is an AC variable-frequency drive manufactured by Danfoss and supplied under the VLT FC 301 Automation Drives series. This controller converts fixed-frequency three-phase power into a modulated output for induction motors. Within automated machinery, it matches motor speed and torque to real-time process demand, lowering energy use and mechanical wear in conveyors, pumps, and compact material-handling equipment. It occupies minimal cabinet space and integrates readily with standard control panels.
The inverter delivers a continuous mechanical output of 0.37 kW. This rating indicates the maximum shaft power that the connected motor can receive under nominal conditions. When operating from a 230 V supply, the drive draws an apparent power of 0.96 kVA, which helps determine upstream fuse and cable sizing. Conversion efficiency is 0.94, so only six percent of the incoming energy is lost as heat. At full load, the internal losses average 29 W, a figure that guides enclosure ventilation requirements and helps determine whether the unit can be mounted inside a compact cabinet. Adequate spacing around the enclosure allows this heat to dissipate without restricting nearby panel components.
The electrical interface accommodates a three-phase line supply of 200–240 VAC and accepts an input current of 2.20 A at rated load. After conversion, the inverter can supply up to 2.40 A to the motor terminals while maintaining stable voltage modulation. In standard mode, the output frequency reaches 590 Hz, allowing high-speed spindles or specialized pumps to operate well above the incoming line frequency. The drive accepts a 50/60 Hz supply with a tolerance of ±5 percent, supporting use with common industrial power systems. Auxiliary 10 V and 24 V outputs can power external transducers or potentiometers without separate power supplies.
