FC-301PK25T2134L2657 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The FC-301PK25T2134L2657 is a drive produced by Danfoss as part of the VLT FC 301 Automation Drives series. It offers a power rating of 0.25 kW and supports three phase power at 200 to 240 VAC with a maximum output frequency of 590 Hz. The drive features continuous output current of 1.80 A and an overload capacity of 160 percent for one minute.
Internal Product Review
The FC-301PK25T2134L2657 is a Danfoss VLT FC 301 automation drive engineered for precise motor control on 200 to 240 VAC three-phase power. A 590 Hz maximum output frequency and 160% one-minute overload capacity give this drive impressive responsiveness and dependable handling of dynamic loads.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-301PK25T2134L2657 is an AC variable frequency drive manufactured by Danfoss for the VLT FC 301 Automation Drives series. It converts fixed-frequency mains power into a regulated output that allows controllers to adjust motor speed without mechanical gear changes. Typical applications include pump flow control, fan air handling, and small conveyor indexing where precise torque regulation and efficient energy use are needed. The drive can also support other automated equipment that requires adjustable motor speed from a compact electronic control platform.
The power section accepts a mains supply between 200–240 VAC and operates on three-phase power, so it can be mounted directly in low-voltage switchboards without isolation transformers. At this input voltage, the inverter delivers 0.25 kW of rated power to the motor while sustaining a continuous line-side current of 1.6 A. On the output side, it can supply up to 1.80 A RMS continuously, providing suitable current capacity for small motors used on feeders, mixers, and indexing tables. The internal pulse-width modulation stage can produce output frequencies as high as 590 Hz, supporting applications that require operation above standard motor speeds. Appropriate motor selection and operating limits remain necessary when using the upper portion of this frequency range.
The control platform monitors power losses and temperature rise, while the heat sink dissipates only 21 W at full load to support compact cabinet layouts. Operating efficiency reaches 0.94, so most of the absorbed energy is transferred to the motor instead of being lost as heat. For short periods of elevated demand, the drive tolerates an overload of 160% for one minute, allowing rapid acceleration of inertial loads without requiring a larger unit. High-speed applications can use a pulse-train input that accepts frequencies up to 110 kHz, enabling accurate follower operation with external positioning controllers. The drive supports shielded motor cables up to 50 m long or unshielded cables up to 75 m long. Its analog feedback path uses 12-bit resolution to preserve command and feedback accuracy during speed or process control.
