FC-301PK25T2134L2174 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The FC-301PK25T2134L2174 is a drive from the VLT FC 301 Automation Drives series made by Danfoss, with a power rating of 0.25 kW and a maximum output frequency of 590 Hz. It operates on three phase power at 200 to 240 VAC and provides two digital outputs at a maximum of 40 mA. The analog output resolution is 12 bit and the digital input max is 28 V DC.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-301PK25T2134L2174 is an AC variable frequency drive produced by Danfoss for the VLT FC 301 Automation Drives series. It converts fixed-frequency mains power into a modulated output so that induction motor speed and torque can follow process demands. Installed in control cabinets, the drive is used with conveyors, small pumps, and fan systems that require precise regulation and improved energy efficiency.
The inverter operates on three-phase power within a nominal range of 200–240 VAC, allowing it to connect directly to low-voltage plant mains. Continuous shaft output reaches 0.25 kW, equivalent to 0.33 HP, which suits fractional-horsepower machinery such as indexing tables and light conveyors. Motor speed is widely adjustable because the control section can generate carrier frequencies up to 590 Hz and supports a flux-vector mode ceiling of 300 Hz. These frequency limits permit overspeed operation or the use of high-pole motors without losing torque resolution. The design tolerates a mains imbalance of 3 percent and limits energization to two power-up cycles per minute to protect internal components. The 301 series designation corresponds to a housing and terminal arrangement that is consistent with the larger FC 302 platform.
Digital inputs withstand levels up to 28 V DC, and two transistor outputs can each source 40 mA for alarms or contactors. A 12-bit analog output provides proportional feedback to SCADA systems, while the pulse terminal records counts at rates up to 110 kHz. The pulse input has a resistance of 4 kΩ to minimize sensor loading. Safe-torque-off logic draws 50 mA RMS at 24 V when active. For wiring flexibility, the drive supports up to 50 m of shielded motor cable or 75 m of unshielded motor cable, allowing the motor to be installed remotely without additional filters. These cable limits support electromagnetic compatibility and predictable signal response during networked operation.
