FC-301P7K5T2134L2971 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The Danfoss FC-301P7K5T2134L2971 is part of the VLT FC 301 Automation Drives series and has a power rating of 7.5 kW with a displacement power factor greater than 0.98. It supports mains voltage from 200 to 240 VAC, operates on three phase power, and delivers a maximum output frequency of 590 Hz. The drive is rated at 10 HP, features an energy efficiency class of IE2, and allows for a starting torque of 160%.
Internal Product Review
The FC-301P7K5T2134L2971 is a Danfoss VLT FC 301 automation drive for three-phase 200 to 240 VAC systems. A 160% starting torque and 590 Hz maximum output frequency support responsive motor control, making this drive an excellent fit for demanding automation duty.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-301P7K5T2134L2971 is an AC variable frequency drive produced by Danfoss for the VLT FC 301 Automation Drives series, which belongs to the wider VLT AutomationDrive FC product group. It regulates three-phase motors by varying the output frequency and voltage. This control allows machinery to start smoothly, conserve energy, and adjust motor speed in response to commands from a PLC or another compatible control system.
The drive has a rated output of 7.5 kW, making it suitable for medium-sized pumps, compressors, conveyors, and similar industrial equipment. It accepts 200–240 VAC three-phase power and can provide an output frequency of up to 590 Hz at the motor terminals, while flux mode limits internal excitation to 300 Hz. Starting torque reaches 160 percent, providing strong breakaway capability without requiring mechanical starters. A displacement power factor of greater than 0.98 and a true power factor of at least 0.9 help reduce reactive current and loading on the incoming power network. Output voltage follows the supply voltage up to 100 percent, and the IE2 efficiency class helps limit conversion losses during operation. No more than two power-ups per minute are recommended to protect the DC link, while Overvoltage Category III insulation provides protection against plant power transients.
The drive maintains full current without derating at elevations up to 1000 m and at surrounding temperatures up to 45 °C when installed according to the required mounting layout. Its semiconductor bridge supports unlimited output switching, allowing high-frequency pulse-width modulation without an additional switching restriction. Motor leads may extend up to 50 m with shielded cable, while unshielded motor cable may extend up to 75 m. These cable limits help control reflected-wave voltage at the motor terminals and support stable operation over longer routing distances. The drive is designed for use on three-phase distribution systems subject to the moderate surge levels covered by its insulation category.
