FC-301P7K5T2134L2630 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Danfoss FC-301P7K5T2134L2630 is part of the VLT FC 301 Automation Drives series and is rated for 10 horsepower with a power rating of 7.5 kW. It operates on 200 to 240 VAC three phase power, delivers a maximum output current of 30.8 A, and achieves an efficiency of 0.96 at rated current. The drive supports flux output frequencies from 0 to 300 Hz and can handle shielded motor cables up to 50 meters and unshielded cables up to 75 meters.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-301P7K5T2134L2630 is an AC variable frequency drive produced by Danfoss for the VLT FC 301 Automation Drives series within the VLT AutomationDrive FC product group. Designed for cabinet installation, the unit connects to a three-phase 200–240 VAC supply and modulates the voltage and frequency delivered to an induction motor. This control allows the drive to match shaft speed to real-time demand, supporting process stability and energy efficiency in material transport, pumping, and HVAC machinery. The adjustable output also provides controlled acceleration and deceleration for applications that require consistent motor response under changing loads.
At the electrical input, the drive draws 28 A in high-overload mode from a supply network operating at 50/60 Hz ±5%. Its conversion efficiency is 0.96, meaning that approximately 4% of the supplied power is lost as heat under rated conditions. The inverter provides a continuous output current of 30.8 A and has an overload capacity of 160% for one minute in every ten-minute period, accommodating brief production surges without tripping. Motor speed can be adjusted across an output frequency range of 0–590 Hz, while the voltage is regulated from 0% to 100% of the incoming level to maintain the required voltage-to-frequency ratio. The drive provides a mechanical power output of 7.5 kW. A starting torque of 160% for 60 seconds helps heavily loaded shafts accelerate without auxiliary starting equipment.
Under maximum load, the inverter dissipates 371 W, so the enclosure ventilation must be sized to remove the resulting heat. When supplied by a 230 V line, the apparent power demand reaches 12.3 kVA, which must be considered when selecting upstream circuit protection. Flux-vector control changes motor torque within 1 ms, providing a rapid response to load or command changes. This control mode supports output frequencies from 0 to 300 Hz for applications that require stable operation at low speed. The drive supports up to 50 m of shielded motor cable or 75 m of unshielded motor cable without exceeding its output filter limits. These cable allowances provide flexibility when the motor and drive cabinet must be positioned at different locations within the machine layout.
