FC-301P7K5T2134L2182 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Danfoss FC-301P7K5T2134L2182 is part of the VLT FC 301 Automation Drives series and has a power rating of 7.5 kW with a 10 horsepower output. This three phase drive supports mains voltages from 200 to 240 VAC and features two analog inputs with 10 bit resolution and one analog output with 12 bit resolution. The drive provides digital output current up to 40 mA and has a scan interval of 1 ms.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-301P7K5T2134L2182 variable frequency drive is produced by Danfoss for the VLT FC 301 Automation Drives series. Within an automation cell, the unit converts a fixed-frequency, three-phase power supply into a regulated output that lets PLCs start, stop, and adjust induction motor speed without mechanical throttling. This function supports pumps, blowers, and material-handling axes where electronic speed control reduces energy use and simplifies coordination with other motion elements.
The drive accepts a nominal input of 200 – 240 VAC from three-phase power and provides a continuous mechanical output of 7.5 kW, equivalent to 10 HP. Its power stage synthesizes carrier frequencies up to 32 kHz, allowing low-ripple voltage for quiet motor operation. Two analog inputs with 10-bit resolution capture process references such as pressure or flow, while 12-bit analog outputs report inverter status with 0.5% full-scale accuracy. Digital outputs can source 40 mA for relay coils or optoisolators. The dedicated 10 V and 24 V reference rails supply 15 mA and 200 mA, respectively, so external potentiometers and sensors do not require separate power supplies. A protected control terminal tolerates up to 28 V DC on logic inputs, safeguarding the electronics against wiring transients.
Control loops inside the VLT AutomationDrive FC product group are updated every 1 ms, and the inverter meets start-and-stop timing demands within ±0.1 ms, providing a consistent response for tightly sequenced machines. Signal wiring may be routed up to 50 m when shielded or 75 m when unshielded, giving panel designers flexibility in large installations. A configurable frequency output port supports high-resolution tachometer feedback. The digital output channel can serve as a fault or ready indicator for connected control equipment.
