FC-301P7K5T2131X7267 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The Danfoss FC-301P7K5T2131X7267 is part of the VLT FC 301 Automation Drives series and provides a power rating of 7.5 kW or 10 HP. It operates on three-phase 200 to 240 VAC mains voltage, offers a continuous output current of 30.8 Amps, and achieves an efficiency of 0.96 at rated output. The drive can handle a starting torque of 160 percent for 60 seconds and supports shielded motor cables up to 50 meters.
Internal Product Review
The FC-301P7K5T2131X7267 is a Danfoss VLT FC 301 automation drive built for motor control on 200 to 240 VAC three-phase power. Strong electrical performance comes from 0.96 efficiency at rated output and a displacement power factor above 0.98, supporting stable and efficient operation. A 7.5 kW rating and 160% starting torque for 60 s make the drive a strong choice for demanding automation service.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-301P7K5T2131X7267 is an AC variable frequency drive manufactured by Danfoss for the VLT FC 301 Automation Drives series. It supplies adjustable three-phase power to induction motors, allowing machine controllers to regulate speed, torque, and direction without mechanical throttling. This capability makes the unit suitable for conveyors, pumps, and other industrial loads that must respond to changing process demands. Its variable-speed operation can reduce unnecessary motor output when an application does not require full capacity. The compact format also supports installation in control panels where available mounting space is limited.
When connected to a 200–240 VAC mains network, the drive has an apparent power rating of 12.3 kVA. Continuous operation draws 28 A from the line and delivers 30.8 A to the motor terminals, allowing upstream protection and downstream conductors to be sized for their respective current levels. A displacement power factor of greater than 0.98 minimizes reactive current, while an efficiency of 0.96 at rated load limits heat generation inside the control enclosure. The output can sustain 10 HP, making the drive suitable for many midrange IEC or NEMA motor frames used in material-handling equipment. Its standard three-phase topology allows it to operate directly from a compatible industrial power network. Proper conductor sizing and protective devices remain necessary for maintaining stable operation under continuous load.
During short-term events, the input current can rise to 44.8 A, while the inverter stage can supply up to 49.3 A. These overload levels support a starting torque of 160% for 60 seconds, providing additional torque for acceleration or temporarily demanding loads. The drive permits no more than two power-ups per minute, which should be considered in systems that use frequent power cycling or safety-related resets. Thermal dissipation at full load is 371 W, so the control enclosure may require forced-air cooling to maintain an acceptable operating temperature. The power rating is 7.5 kW, and the true power factor remains at least 0.9 across the operating speed range. Motor leads may extend to 50 m with shielded cable or 75 m with unshielded cable without exceeding the applicable switching-frequency limits for this drive series.
