FC-301P5K5T4134L2954 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Danfoss FC-301P5K5T4134L2954 is part of the VLT FC 301 Automation Drives series and delivers a power rating of 5.5 kW with a 7.5 HP output. It operates on three phase power at 380 to 480 VAC and supports energy efficiency class IE2. The drive features two digital outputs and accommodates a maximum shielded motor cable length of 50 meters.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-301P5K5T4134L2954 is a variable frequency drive manufactured by Danfoss for the VLT FC 301 Automation Drives series. By modulating AC supply frequency and voltage, the unit governs induction motor speed and torque, allowing conveyors, pumps, and fans to follow process demands without mechanical throttling in industrial automation cells. The drive supplies a continuous mechanical output of 5.5 kW, equivalent to 7.5 HP, so it is suitable for midrange pump or conveyor duties.
It accepts line voltages from 380 to 480 VAC and produces an output frequency of up to 590 Hz for high-speed motors. Up to 160% starting torque is available to move loaded shafts without external soft starters. Internal electronics provide a 10 V reference that can supply 15 mA and a 24 V rail rated at 200 mA; both can power sensors or potentiometers. Two digital transistor outputs report alarms or operating status. The relay can switch 240 VAC at 2 A for contactor logic. A flux torque rise time of 1 ms and a VVC+ rise time of 10 ms provide rapid dynamic response for tightly regulated speed loops.
The numeric code 301 identifies the controller as an FC-301 model within the VLT AutomationDrive FC product group. It meets the IE2 efficiency class, helping limit conversion losses during continuous production. Ambient operation is permitted at temperatures up to 45 °C, and the drive tolerates no more than two power-ups per minute to protect the DC-link capacitors. The control algorithms can apply full vector excitation at frequencies up to 300 Hz, after which the flux is reduced to extend the available speed range. The drive requires three-phase power. It can be installed up to 50 m from the motor when shielded cabling is used, while unshielded leads permit a distance of up to 75 m.
