FC-301P5K5T4134L2719 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The Danfoss FC-301P5K5T4134L2719 belongs to the VLT FC 301 Automation Drives series and supports a power rating of 5.5 kW with a rated output of 7.5 HP. This three phase drive operates at mains voltages from 380 to 480 VAC and features a VVC+ control principle. It achieves up to 0.97 efficiency at rated current and handles a maximum output frequency of 590 Hz.
Internal Product Review
The FC-301P5K5T4134L2719 is a Danfoss VLT FC 301 automation drive rated at 5.5 kW for 380 to 480 VAC systems. VVC+ control and a 590 Hz maximum output frequency support precise motor response and flexible speed regulation. Efficiency at rated current reaches 0.97, making the unit a strong choice for dependable automation service.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-301P5K5T4134L2719 is an AC variable frequency drive produced by Danfoss for the VLT FC 301 Automation Drives series. Belonging to the VLT AutomationDrive FC product group, it employs the VVC+ control principle to convert fixed three-phase mains power into a modulated output that regulates motor speed in conveyors, pumps, and general process equipment. The drive is commonly used in automated manufacturing lines where accurate speed regulation and reduced mechanical stress are required.
The drive is designed for 380–480 VAC supplies and operates with an electrical efficiency of 0.97 at rated current, minimizing heat production inside compact cabinets. Its continuous power rating is 5.5 kW, supported by an apparent power draw of 9.0 kVA and an intermediate DC-link current of 14.3 A under normal operating conditions. Peak input demand on 380–440 V networks reaches 11.7 A, while the inverter can deliver 13 A of output current to the motor terminals. Flux control remains linear up to 300 Hz. Vector control extends the usable output frequency to a maximum of 590 Hz for high-speed applications. The drive also provides 7.5 HP of motor output for connected equipment.
The braking chopper activates when the DC-link voltage reaches 728 V DC. A high-voltage warning is issued at 810 V DC, and an overvoltage alarm trips at 820 V DC to protect the power components. During normal operation, the converter dissipates 187 W, which must be considered when sizing enclosure ventilation. The output section supports shielded motor cables up to 50 m long while maintaining compliance with electromagnetic compatibility limits. Unshielded motor cable runs can extend up to 75 m when the installation does not require shielding. The three-phase topology distributes loading across the supply conductors, and the 301 series designation identifies compatibility with the associated control and input/output accessories.
