FC-301P5K5T4134L2687 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The FC-301P5K5T4134L2687 is an automation drive manufactured by Danfoss and is part of the VLT FC 301 Automation Drives series. It has a power rating of 5.5 kW, supports three phase 380 to 480 VAC mains voltage, and delivers 7.5 HP. The drive features a control scan interval of 1 ms, output frequency range from 0 to 590 Hz, and a true power factor of at least 0.9.
Internal Product Review
The FC-301P5K5T4134L2687 is a Danfoss VLT FC 301 automation drive designed for precise motor control on 380–480 VAC three-phase power. A 1 ms control scan interval and ≤2 ms system response time give this unit sharp command tracking and dependable process performance.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-301P5K5T4134L2687 is a variable frequency inverter manufactured by Danfoss for the VLT FC 301 Automation Drives series. It converts fixed-frequency mains power into a synthesized output so that motor speed can match process demand without mechanical throttling. Used with conveyors, blowers, and dosing pumps, the drive provides closed-loop speed control and integrates digital I/O for local sequencing tasks. Its adjustable output allows connected motors to operate at different speeds while retaining electronic control over acceleration, deceleration, and steady-state operation.
The continuous output power is 5.5 kW, providing capacity for motors used in a range of industrial processes. The inverter operates from a 380–480 VAC network and is intended for three-phase power systems running at the site’s standard frequency. The synthesized output has a frequency range of 0–590 Hz, and its frequency resolution is ±0.003 Hz for precise speed adjustments. Output voltage follows the selected control mode from zero to 100% of the incoming line voltage, while flux mode covers frequencies from 0 to 300 Hz for constant-torque operation. The drive supports shielded motor cable runs up to 50 m, allowing the motor to be installed at a practical distance from the control enclosure. It also provides a relay contact rated for 240 VAC at 2 A to operate compatible auxiliary devices.
Internal routines execute at a control scan interval of 1 ms, while the measured system response time to a reference change is ≤2 ms, enabling tight regulation during rapid load cycles. Twelve digital inputs accept 0–24 V DC commands, and a pulse input channel processes feedback signals from 0 to 110 kHz. The inverter maintains a displacement power factor of >0.98, while its overall true power factor remains at or above 0.9 under rated load. It tolerates supply frequencies of 50/60 Hz ±5% without derating. Under these supply conditions, the inverter can deliver an output voltage ranging from zero to 100% of the incoming line voltage.
