FC-301P5K5T2134L2938 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Danfoss FC-301P5K5T2134L2938 is part of the VLT FC 301 Automation Drives series and has a power rating of 5.5 kW with a 7.5 horsepower output. It supports a mains voltage of 200 to 240 VAC on three phase power and offers a continuous output current of 24.2 amps. This unit achieves a 0.96 efficiency rating and is classified as IE2 energy efficiency.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-301P5K5T2134L2938 is an AC drive produced by Danfoss in the VLT FC 301 Automation Drives series. It converts fixed three-phase mains power into variable-voltage, variable-frequency output for controlling induction motors. This capability allows motor speed and torque to follow real-time load demands in conveyors, pumps, process fans, and similar industrial equipment. The 301 platform uses a compact mechanical layout and an integrated control architecture suited to installation in space-limited industrial panels.
The drive connects to a three-phase supply rated at 200-240 VAC and delivers up to 5.5 kW of continuous shaft power. Its supply components are rated for an apparent power of 9.6 kVA. Under rated operating conditions, the rectifier draws 22 A, while the inverter section can supply 24.2 A to the motor terminals. The logic circuits accept 24 V safety inputs that draw 50 mA rms, providing compatibility with common low-voltage control circuits. Six programmable digital inputs tolerate up to 28 V DC and can receive operating commands or machine status signals. A digital sink output can switch loads of up to 40 mA for status indication or optically isolated feedback. These input and output channels allow the drive to exchange basic control signals with external automation equipment.
Overall power conversion efficiency reaches 0.96, placing the unit in the IE2 energy-efficiency class and limiting full-load heat dissipation to 239 W. For intermittent overloads, the inverter provides 160% for 1 minute every 10 minutes, permitting brief torque increases during acceleration or process disturbances. The maximum switching frequency is 32 kHz, allowing the operating setting to balance audible motor noise against motor heating. Pulse-width modulation regulates the output waveform supplied to standard squirrel-cage induction motors. Mechanical output is also rated at 7.5 HP, providing the corresponding horsepower value for systems that use customary units. The drive supports continuous operation while retaining short-duration overload capacity for changing machine demands.
