FC-301P5K5T2134L2705 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Danfoss FC-301P5K5T2134L2705 belongs to the VLT FC 301 Automation Drives series and is rated for 7.5 horsepower with a power rating of 5.5 kW. It operates on three-phase 200 to 240 VAC mains voltage and offers 0.96 efficiency at rated current. The drive features a 10-bit analog input resolution, 12-bit analog output resolution, and a control card scan interval of 1 ms.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-301P5K5T2134L2705 is a variable-frequency drive produced by Danfoss for the VLT FC 301 Automation Drives series. Within the VLT AutomationDrive FC product group, it converts AC power into a regulated output that allows induction motors to follow speed or torque references in conveyors, pumps, and general machinery. By combining the control and inverter stages in one housing, the unit handles process tasks that might otherwise require mechanical throttling or multi-speed starters.
The inverter supplies up to 5.5 kW of electrical output, equivalent to 7.5 HP, when connected to a 200–240 VAC power supply. System efficiency reaches 0.96 at rated current, so only a small portion of the supplied energy is lost as heat. Internal regulators are refreshed every 1 ms, maintaining stable motor flux during sudden load changes. The analog command channel has a 10-bit resolution and accepts up to 30 mA, providing sufficient granularity for precise speed control. Motor terminals may be connected with up to 75 m of unshielded cable or 50 m of shielded cable; the shorter shielded-cable limit helps keep common-mode noise within the drive’s operating limits. The mains voltage may have a maximum imbalance of 3.0%, while Overvoltage Category III insulation helps protect the semiconductors from surge stress. The rectifier section requires a three-phase power input for normal operation.
The drive’s analog feedback port converts process values with a 12-bit resolution and can accommodate loads as low as 500 Ω without signal distortion. Digital command lines tolerate up to 28 V DC, and their 4 kΩ input resistance limits the current drawn from connected PLC outputs. Power cycling is limited to two starts per minute to prevent excessive inrush stress on the DC bus capacitors. The control architecture processes command and feedback data rapidly, supporting responsive motor regulation when operating conditions change. The 301 series designation identifies the control platform and associated parameter structure used by this drive.
