FC-301P3K7T2134L2969 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The Danfoss FC-301P3K7T2134L2969 is part of the VLT FC 301 Automation Drives series and operates on three-phase, 200 to 240 VAC mains voltage. It has a power rating of 3.7 kW, a continuous output current of 16.7 amps, and delivers 5.0 horsepower. The drive supports a displacement power factor greater than 0.98 and can handle output frequencies from 0 to 590 Hz.
Internal Product Review
FC-301P3K7T2134L2969 is a Danfoss VLT FC 301 automation drive rated for 3.7 kW operation on 200–240 VAC mains. Three-phase power architecture and a 160% overload rating for 1 min/10 min give the unit strong control stability during demanding motor starts. Output frequency up to 590 Hz makes the drive a very capable choice for flexible speed regulation.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-301P3K7T2134L2969 is a variable-frequency drive built by Danfoss for the VLT FC 301 Automation Drives series within the VLT AutomationDrive FC product group. It is installed between a 200–240 VAC three-phase supply and an induction motor so that a PLC or stand-alone controller can vary speed, torque, and process throughput without mechanical throttling. By generating a controlled pulse-width modulated voltage in response to the commanded frequency, the unit supports closed-loop regulation in conveyors, pumps, and general motion axes used throughout industrial automation.
The drive has a continuous motor output rating of 3.7 kW, which corresponds to 5.0 HP. It draws a mains current of 15 A and supplies the connected motor with up to 16.7 A. These current ratings apply within a supply frequency range of 50/60 Hz with a tolerance of ±5%. Output frequency is programmable from 0–590 Hz, providing a broad operating range for motors used in variable-speed applications. A separate flux control mode operates from 0 to 300 Hz and supports applications that require strong torque performance at low speeds. The inverter produces a three-phase output and can adjust its voltage from 0% to 100% of the incoming supply to regulate motor torque across the available speed range.
During periods of high demand, the power stage provides an overload capacity of 160% for one minute every ten minutes before returning to its nominal operating limit. At rated load, the converter has an apparent power rating of 6.65 kVA at 230 V and dissipates 185 W as heat. Its displacement power factor remains above 0.98, while the true power factor is at least 0.9 to reduce reactive current on the supply. Shielded motor cables can extend up to 50 m, while unshielded motor cables can extend up to 75 m. These cable length limits support flexible equipment layouts while maintaining proper transmission of the drive’s output waveform to the motor.
