FC-301P3K7T2134L2670 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The Danfoss FC-301P3K7T2134L2670 is part of the VLT FC 301 Automation Drives series and delivers a power rating of 3.7 kW or 5.0 horsepower. This drive operates on 200 to 240 VAC three phase power, with an input current of 15 A and output current of 16.7 A. Its output frequency ranges from 0 to 590 Hz and its displacement power factor is greater than 0.98.
Internal Product Review
The FC-301P3K7T2134L2670 is a Danfoss VLT FC 301 automation drive with a 3.7 kW rating and three-phase power input. Operation remains efficient under variable loads with a true power factor of ≥0.9 and an output frequency range of 0–590 Hz. A strong choice for controlled motor applications requiring 16.7 A output current.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-301P3K7T2134L2670 is an AC variable frequency drive manufactured by Danfoss and offered in the VLT FC 301 Automation Drives series. The unit belongs to the VLT AutomationDrive FC product group and converts fixed-frequency, three-phase 200–240 VAC utility power into a variable output that allows precise speed control of standard induction motors. By adjusting motor speed instead of throttling mechanical elements, the drive helps automate conveyors, pumps, and fans while reducing energy consumption and mechanical wear in industrial installations.
Its electrical section is designed for a three-phase supply range of 200–240 VAC, within which the rectifier draws an input current of 15 A. After DC conversion and IGBT modulation, the inverter can deliver an output current of 16.7 A to the motor terminals. The synthesized output frequency ranges from 0 to 590 Hz, so asynchronous motors can be operated above their base speed when the mechanical design permits. Continuous shaft power is specified at 3.7 kW. The drive keeps voltage and current in phase to maintain a true power factor of at least 0.9 during operation.
Its apparent demand on the supply network is 6.65 kVA, a value that helps with sizing upstream protection and cabling. Danfoss limits phase imbalance to 3.0% to prevent uneven loading of the rectifier, and only two power-up sequences per minute are permitted to protect the precharge circuit. High efficiency is supported by an estimated heat loss of 185 W that must be removed from the enclosure. For signal interfaces, a relay rated at 240 VAC and 2 A can switch external contactors, while installations may use up to 50 m of shielded motor cable or 75 m of unshielded cable. The network displacement power factor remains greater than 0.98, minimizing reactive current and supporting compliance with plant harmonic standards.
