FC-301P3K7T2131B1192 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The Danfoss FC-301P3K7T2131B1192 is part of the VLT FC 301 Automation Drives series and delivers a power rating of 3.7 kW with 5.0 horsepower. It supports three-phase power input of 200 to 240 VAC and operates at a maximum input current of 15 A with an efficiency of 0.96. This drive allows for output frequencies up to 590 Hz and is suitable for use at ambient temperatures up to 45°C without current derating.
Internal Product Review
The FC-301P3K7T2131B1192 is a Danfoss VLT FC 301 automation drive with a 3.7 kW rating and 200–240 VAC input. Efficient operation stands out from a technical standpoint, with 0.96 efficiency and an IE2 energy efficiency class supporting dependable service. A 0–590 Hz output frequency gives the drive excellent flexibility for demanding three-phase motion applications.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-301P3K7T2131B1192 is an AC variable-frequency drive produced by Danfoss for the VLT FC 301 Automation Drives series. The unit converts fixed-frequency three-phase mains power into a controlled output that allows plant controllers to regulate motor speed and torque. It is suitable for conveyors, pumps, and general motion applications that require adjustable motor operation in industrial automation systems.
This model delivers 3.7 kW of continuous motor output power while drawing an apparent power of 6.0 kVA on 208 V networks. A rated output current of 16.7 A is available at the motor terminals, and the input current is limited to a maximum of 15 A from a 200–240 VAC three-phase supply. The inverter accepts line frequencies of 50/60 Hz ±5% and can generate output frequencies from 0–590 Hz. A separate flux-mode range of 0–300 Hz supports sensorless vector control. Output voltage is adjustable from 0 to 100% of the supply voltage, allowing the drive to match the connected motor's operating requirements. Conversion efficiency reaches 0.96, and the product meets the IE2 energy-efficiency class. Shielded motor cables up to 50 m long are supported without additional output reactors, while unshielded cable runs can extend to 75 m. These cable allowances provide flexibility when the motor and drive must be installed in separate parts of a machine or facility.
The drive supplies full rated current at ambient temperatures up to 45 °C, allowing operation in standard industrial control cabinets when adequate ventilation is provided. It can be installed at altitudes up to 1000 m without derating, which supports use in facilities located well above sea level. Internal power loss is limited to 185 W, providing a clear basis for cabinet heat-dissipation planning. The adjustable output supports speed control over a broad operating range, while the flux-mode capability provides improved motor regulation for applications that require responsive torque. The supported supply tolerance also helps the drive remain stable when connected to lightly regulated industrial power systems.
