FC-301P37KT2134L2945 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The FC-301P37KT2134L2945 is a 50 HP automation drive by Danfoss and belongs to the VLT FC 301 Automation Drives series. This three-phase unit supports a power rating of 37 kW and operates on mains voltage from 200 to 240 VAC with a supply frequency of 50 or 60 Hz. It provides four digital inputs, an analog output range of 0 or 4 to 20 mA, and an output frequency range from 0 to 590 Hz.
Internal Product Review
The FC-301P37KT2134L2945 is a Danfoss VLT FC 301 automation drive rated for 37 kW and 50 HP. Three-phase 200–240 VAC input and 0–590 Hz output make this drive an excellent choice for flexible, precise motor control.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-301P37KT2134L2945 is an AC variable frequency drive produced by Danfoss within the VLT FC 301 Automation Drives series. This inverter converts fixed-frequency, three-phase mains power into modulated voltage and frequency output, allowing plant controllers to regulate induction motor speed, torque, and energy use. It is suitable for automation systems such as conveyors, pumps, and material-handling lines, and its compact design supports installation in control panels.
Input power compatibility is rated for 200–240 VAC, allowing direct connection to low-voltage industrial supplies. The inverter produces an adjustable output frequency of up to 0–590 Hz, allowing the drive to operate across constant-torque and field-weakening regions without additional gear reduction. Continuous electrical capacity reaches 37 kW, matching medium-sized motors that require steady process throughput. The power stage has a displacement power factor greater than 0.98, so reactive current draw remains minimal across the operating range. For analog feedback or external loop control, the unit supplies a programmable 0/4–20 mA signal that can represent speed, torque, or other process variables.
The drive can start and operate motors rated at 50 HP. It accepts three-phase power, and phase imbalance should remain within 3.0% of the rated line voltage to avoid current derating. Protection against fault currents is supported by a short-circuit withstand rating of 100,000 A RMS symmetrical, enabling installation on feeder circuits that use current-limiting fuses or molded-case circuit breakers. The control terminal block provides 4 (5) digital input channels for start, stop, and preset frequency commands. The unit permits only one power-up per minute to protect its DC-link capacitors. It supports cable runs of up to 50 m with shielded cable or 75 m with unshielded cable. Flux-vector operation extends to 0 Hz in the 0–300 Hz operating mode, while the true power factor is at least 0.9 at nominal load.
