FC-301P2K2T4134L2684 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The Danfoss FC-301P2K2T4134L2684 is a 3 horsepower drive from the VLT FC 301 Automation Drives series. It operates on three phase power with a supply voltage of 380 to 480 VAC and has a power rating of 2.2 kW. The drive offers an output frequency range from 0 to 590 Hz and supports analog outputs of 0 or 4–20 mA.
Internal Product Review
The FC-301P2K2T4134L2684 is a Danfoss VLT FC 301 automation drive built for motor control on 380 - 480 VAC three-phase power. The 2.2 kW rating and 0–590 Hz output frequency support smooth speed regulation and make this drive a strong choice for demanding automation duty.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-301P2K2T4134L2684 is a variable-frequency drive produced by Danfoss for the VLT FC 301 Automation Drives series. Mounted in a machinery cabinet, it governs a three-phase induction motor by adjusting the terminal voltage and frequency so process speed follows a reference from the controller. The drive is intended for conveyors, small pumps, and fan systems that require compact motor control, built-in diagnostics, and straightforward parameter navigation in industrial automation.
The inverter accepts a three-phase mains supply of 380–480 VAC at 50/60 Hz ±5%. It rectifies the incoming power and produces an output frequency of 0–590 Hz, while the output voltage can be adjusted from zero to 100% of the incoming line voltage. Continuous shaft power reaches 2.2 kW, equivalent to 3.0 HP, allowing the drive to operate moderate-duty motors within the applicable load limits. A flux-mode frequency range of 0–300 Hz supports constant-torque applications, and the pulse-width modulation carrier can be adjusted between 0 and 110 kHz to manage motor noise. Mains phase imbalance must remain within 3.0% to prevent uneven loading of the input rectifier. The converter should not be energized more than twice per minute because frequent power cycling can place additional stress on the DC-bus capacitors.
The analog output can be configured for 0/4–20 mA operation, allowing it to transmit a process value or motor-related signal to compatible monitoring equipment. Logic inputs accept 0–24 V DC signals and have a maximum input level of 28 V DC, providing standard low-voltage command paths for external controls. Under rated load, the displacement power factor remains greater than 0.98, while the true power factor remains at least 0.9; these values help limit reactive demand and inefficient current draw from the supply. Motor leads may extend up to 50 m when shielded cable is used or up to 75 m with unshielded cable. Shielded wiring provides better control of electromagnetic interference, while the longer unshielded allowance may be suitable where cable emissions are managed by the surrounding installation.
