FC-301P2K2T4134L2644 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The Danfoss FC-301P2K2T4134L2644 is part of the VLT FC 301 Automation Drives series and has a power rating of 2.2 kW with a maximum output of 3.0 HP. Designed for three phase power and operating at 380 to 480 VAC, the drive has a high overload efficiency of 0.97 and energy efficiency class IE2. It features 4 digital inputs, 2 digital outputs, 1 relay output, and supports a 24 V output max load of 200 mA.
Internal Product Review
The FC-301P2K2T4134L2644 is a Danfoss VLT FC 301 automation drive rated for 2.2 kW on 380-480 VAC systems. IE2 efficiency and 3.0 HP capacity make the unit a strong fit for dependable motor control in standard industrial duty. Support for 50 m shielded motor cable runs and 75 m unshielded runs adds practical installation flexibility, a valuable advantage in panel-based drive applications.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-301P2K2T4134L2644 is an AC variable-frequency drive manufactured by Danfoss and supplied within the VLT FC 301 Automation Drives series. Classified under the VLT AutomationDrive FC product group, this controller modulates power to three-phase induction motors so conveyors, pumps, and fans can run at commanded speeds instead of the fixed line frequency. Its compact housing and integrated control terminals allow the device to fit inside machine panels, where it provides motor control and supports reduced energy use in industrial automation systems.
The drive accepts a three-phase line supply of 380 to 480 VAC and delivers up to 2.2 kW of continuous output to the connected motor. Under high-overload duty, it can supply 3.9 kVA of apparent power while drawing 5.0 A from the line and delivering 5.6 A on the output side, allowing short-term acceleration without derating. The control electronics include four digital inputs, two digital outputs rated for 40 mA each, and a 12-bit analog output that can transmit feedback to an external controller. A 24 V auxiliary rail can supply 200 mA to sensors, while one Form C relay provides a galvanically isolated status signal for supervisory equipment.
In high-overload mode, the inverter maintains an efficiency ratio of 0.97, and it releases only 88 W of heat at full high-overload output, reducing cabinet cooling demands. The design carries the IE2 energy-efficiency classification and retains full output at altitudes up to 1000 m without derating. Motor leads can extend up to 50 m when shielded cable is used or 75 m when unshielded conductors are used, providing flexibility when the drive and motor are installed in separate areas of a machine. These cable allowances support practical routing through control cabinets, cable trays, and machine frames without requiring the drive to be mounted directly beside the motor.
