FC-301P2K2T4134F9550 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Danfoss FC-301P2K2T4134F9550 is an automation drive in the VLT FC 301 Automation Drives series, with a power rating of 2.2 kW and a 3.0 HP output. It operates with a mains voltage of 380 to 480 VAC, has a maximum output frequency of 590 Hz, and a maximum flux frequency of 300 Hz. This drive offers an efficiency of 0.97 and supports three-phase power.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-301P2K2T4134F9550 is an AC variable frequency drive manufactured by Danfoss within the VLT FC 301 Automation Drives series. Designed for cabinet mounting, the unit converts fixed-frequency three-phase mains power into a regulated output that lets PLCs adjust induction motor speed according to process demand. By modulating voltage and frequency, the drive supports energy-efficient pump, fan, and conveyor operation in industrial automation.
On the supply side, the drive tolerates a three-phase mains range of 380 to 480 VAC and draws 5.0 A when operated at 380 to 440 V. Its inverter section delivers 5.6 A of output current while maintaining an efficiency of 0.97, so only 88 W of heat must be removed under rated load. The control board accepts logic commands up to 28 V DC, and a brake chopper becomes active at 728 V DC to protect the DC link. Electronic monitoring issues a high-voltage warning at 810 V DC and an overvoltage alarm once the intermediate circuit reaches 820 V DC. For dynamic applications, the drive permits a maximum flux frequency of 300 Hz and can generate up to 590 Hz at the output terminals. An overload tolerance of 160% for 1 minute every 10 minutes is available for accelerating heavy loads.
The converter delivers a continuous motor output of 2.2 kW, which corresponds to 3.0 HP when driving standard induction motors. Its internal IGBT pattern can be switched at a carrier rate of up to 110 kHz, enabling low-ripple current even with extended motor leads. Field wiring is simplified by terminals that accept power conductors with a cross-sectional area of up to 4 mm². When these cables are shielded, the permissible length is 50 m; unshielded cables may be up to 75 m long. These cable allowances support flexible routing between the cabinet-mounted converter and the connected motor without requiring unusually large conductors.
