FC-301P2K2T4131B0966 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Danfoss FC-301P2K2T4131B0966 is a three-phase automation drive from the VLT FC 301 Automation Drives series, with a power rating of 2.2 kW and 3.0 HP. It operates on 380 to 480 VAC mains voltage and features a drive efficiency of 0.97 and an apparent power of 3.9 kVA at 400 V. The drive has an overload capacity of 160% for 1 minute per 10 minutes and supports a maximum output frequency of 590 Hz.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-301P2K2T4131B0966 is a variable frequency drive manufactured by Danfoss for the VLT FC 301 Automation Drives series. Within automated plants, it modulates the voltage and frequency supplied to three-phase induction motors, making electronic speed control possible without mechanical throttling. This operation can lower energy use across conveyors, pumps, and material-handling stations by matching motor speed to process demand.
This unit delivers a continuous power rating of 2.2 kW, which corresponds to 3.0 HP of mechanical shaft power. It connects to industrial mains within the 380–480 V AC range and draws 3.9 kVA of apparent power at 400 V while maintaining a drive efficiency of 0.97. The internal power section is designed for three-phase input and tolerates a maximum mains imbalance of 3.0%. An overload capacity of 160% for one minute in every 10-minute period allows the controller to handle short process surges without tripping. The semiconductor section issues a high-voltage warning when the DC-link voltage reaches 810 V DC. If the DC-link voltage rises to 820 V DC, the drive generates an overvoltage alarm so the control system can reduce deceleration or activate suitable braking equipment.
The displacement power factor is greater than 0.98, while the true power factor is at least 0.9, reducing reactive current on the supply network. The inverter can raise the motor frequency to 300 Hz in flux-control mode and provide an output frequency of up to 590 Hz for high-speed applications. The logic circuits provide one digital output rated at 40 mA and a 24 V auxiliary supply that supports up to 200 mA for relays or sensors. Shielded motor cable may extend to 50 m, while unshielded cable may extend to 75 m without exceeding the applicable electromagnetic compatibility or voltage rise-time limits. Thermal power loss is limited to 88 W, which helps reduce the heat load inside the installation enclosure. The available digital output and auxiliary supply allow basic external devices to interface directly with the drive without placing excessive demand on its control circuits.
